Usado continuous en Japón

AC/DC CURRENT PROBE CT6830

• Fabricante: HIOKI E.E

rated measurement current: 2 A AC/DC | Max. allowable input: 3 A rms continuous (±4.3 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connectors...

HORIBA Advanced Techno Co., Ltd. ORP-11

• Fabricante: Horiba

Measurement principle: ORP electrode | Minimum sample volume: 0.3 ml (0.05 ml with Sampling Sheet B) | Orp range / resolution: -1000 to 1000 mV / 1 mV | Accuracy: ± 2 mV | Maximum calibration points: 1 | Tem...

UV500-Compact

Sample flow: Recommended : 0 - 5 L/MIN | Sample pressure: 0 – 4 Bar (0 - 1 Bar with sampling peristaltic pump) | Sample temperature: 0 °C to 80 °C | Wet parts material: Quartz, Polypropylene, Polyethylene, FPM (V...

CLAMP ON PROBE 9010-50

Rated current: 10 A to 500 A AC, 6 ranges | Accuracy: ±2 % rdg. ±1 % f.s. (45 to 66 Hz) | Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 6 % rdg. (at 10 A and 20 A range)...

CLAMP ON PROBE 9018-50

Rated current: 10 A to 500 A AC, 6 ranges | Accuracy: ±1.5% rdg. ±0.1% f.s. (45 to 66 Hz) | Frequency characteristics: Add to amplitude accuracy : ± 1% rdg. Add to phase accuracy : ± 2.5° for frequencies from 40 ...

Yamato INE800

• Fabricante: Yamato
• Modelo: INE800

Safety device: Self-diagnostic functions(Temp. sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention), Key-lock, Over current ELB, Overheat preventive device | She...

HORIBA Advanced Techno Co., Ltd. F-11

• Fabricante: Horiba

Measurement principle: Ion selective electrode | Minimum sample volume: 0.3 ml (0.01 ml with sampling sheet B) | Measurement range: 0.1 to 990 ppm (mg/L) | Resolution: 0.1 to 9.9 ppm: 0.1 ppm 10 to 99 ppm: 1 ppm ...

UV300-5D

• Fabricante: Horiba

Sample flow: 0.05 - 1 l/min | Sample pressure: 0 - 4 Bar | Sample temperature: 0 - 50°C | Wet parts material: Quartz, Polypropylene, Polyethylene, FPM (viton), PMMA | Measuring time: 5 sec for turbidity, pH, cond...

CLAMP ON PROBE 3276

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 100 MHz (-3 dB) | Rise time: 3.5 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max...

CLAMP ON PROBE 3275

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 2 MHz (-3 dB) | Rise time: 175 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 500 A rms (requires derating at frequency) | Max. ...

CLAMP ON PROBE 3273-50

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max. a...

CLAMP ON PROBE 3274

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 10 MHz (-3 dB) | Rise time: 35 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 150 A rms (requires derating at frequency) | Max. ...

EL200

• Fabricante: Horiba

Inputs: pH/ORP 2 X 4-20 mA input, 2-wire or 4-wire (15v DC galvanically isolated source, 50mA maxi) | Outputs: 2 x 4-20mA active output (load of 500 ohm maxi) | Relays: 4x electromechanical SPDT (form C) contact,...

UV300

Sample flow: Recommended: 0 - 5 l/min | Sample pressure: 0 - 4 Bar (0 - 1 Bar with sampling peristaltic pump) | Sample temperature: 0 - 80 °C | Wet parts material: Quartz, Polypropylene, Polyethylene, FPM (viton)...

PHASE DETECTOR PD3129

Functions: Phase detection (positive and negative) | Voltage detection method: Static induction | Voltage range: 70 to 600 V AC (50/60 Hz) (sine wave,continuous input) | Frequency range: 45 Hz to 66 Hz | Object t...