Usado continuous en Japón

Yamato IN804

• Fabricante: Yamato
• Modelo: IN804

System: Forced air convection | Operating temperature range: -10～50℃ | Temperature adjustment accuracy: ±0.3℃（when refrigerator is in continuous operation), ±1.0℃（when refrigerator is in cycle operation） | Temper...

Yamato IN604W

• Fabricante: Yamato

System: Forced air convection | Operating temperature range: -10～50℃ | Temperature adjustment accuracy: ±0.3℃（when refrigerator is in continuous operation), ±1.0℃（when refrigerator is in cycle operation） | Temper...

Yamato INC820

• Fabricante: Yamato

System (upper chamber): Natural convection, Air jacket | Operating temp. range(upper chamber): Room temp.＋5℃～80℃ | Temp. adjustment accuracy (upper chamber): ±0.5℃（at 37℃） | Temp. distribution accuracy (upper cha...

CLAMP ON SENSOR 9669

Rated measurement current: 1000 A AC | Max. measurement current: Continuous 1000 A (45 to 66 Hz) | Output rate: 0.5 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±1.0% rdg. ±0.01% f.s. | Phase accuracy: ±1° (45 ...

UV500 IMO

Sample flow: Recommended : 0 – 5 L/min | Sample pressure: 0 – 4 Bar (0 - 1 Bar with sampling peristaltic pump) | Sample temperature: 0 °C to 80 °C 0 to 80 °C for NH4 or H2S | Wet parts material: Quartz, Polypropy...

HORIBA Advanced Techno Co., Ltd. K-11

• Fabricante: Horiba

Measurement principle: Ion Selective Electrode | Minimum sample volume: 0.3ml (0.05ml with sampling sheet B) | Measurement range: 4 to 9900 ppm (mg/L) 0.1 to 250 mmol/L 2 to 5000 kg/10a | Resolution: 0 to 99...

EARTH TESTER FT6041

• Fabricante: HIOKI E.E

measurement parameters: • Ground resistance measurement: 4-pole method, 3-pole method, 2-pole method, MEC function, clamp-on measurement (two clamps) • Soil resistivity measurement: 4-pole method • Low-resistanc...

CARD HiTESTER 3244-60

Dc voltage range: 419.9 mV to 500 V, 5 ranges, Basic accuracy: ±0.7 % rdg. ±4 dgt. | Ac voltage range: 4.199 V to 500 V, 4 ranges, Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt. (Average rectified) | Resistanc...

CLAMP ON SENSOR 9695-02

Rated measurement current: 50 A AC | Max. measurement current: Continuous 60 A (45 to 66 Hz) | Output rate: 10 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±2° (4...

HORIBA Advanced Techno Co., Ltd. HE-480C

• Fabricante: Horiba

Product name: Industrial conductivity meter | Measurement method: Electrode type (2-electrode method) | Cell constant: 0.01/cm, 0.1/cm, or 1.0/cm | Temperature sensor specifications: Platinum resistance 1000 Ω/0℃...

HORIBA Advanced Techno Co., Ltd. HP-480

• Fabricante: Horiba

Product name: Industrial pH meter | Measuring range: 0 pH to 14 pH: 0.01 pH resolution. Temperature 0℃ to 100℃: 1℃ resolution (selectable display). | Transmission output: 4 mA to 20 mA DC: input/output isolated t...

CLAMP ON SENSOR 9695-03

Rated measurement current: 100 A AC | Max. measurement current: Continuous 130 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±1° (...

CLAMP ON PROBE 9132-50

Rated current: 20 A to 1000 A AC, 6 ranges | Accuracy: ±3 % rdg. ±0.2 % f.s. (45 to 66 Hz) | Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg. | Output rate: 0.2 V ...

HORIBA Advanced Techno Co., Ltd. Salt-22

• Fabricante: Horiba

Measurement principle: Ion Selective Electrode | Minimum sample volume: 0.3ml (0.05ml with sampling sheet B) | Salinity range: 0.01 to 25% by weight | Resolution: 0.00 to 0.99%: 0.01% 1.0 to 9.9%: 0.1% 10 to...

ANALOG MΩ HiTESTER IR4016

• Fabricante: HIOKI E.E

Rated output voltage: 500 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 0.1 M to 50 MΩ | Lower limit resistance: 0.5 MΩ (measurement resistance v...