DISPLAY UNIT CM7290 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Sensor
- CT7642, 7742
- Measurement parameters
- DC, AC, DC+AC, Hz
- Crest factor
- 3 at 5000 count or 2.5 at 6000 count for AC and DC+AC
- Output method
- WAVE, RMS, PEAK, FREQ
- Input connectors
- HIOKI PL 14
- Output update time
- PEAK--- FAST: 0.02 s / NORMAL: 0.2 s / SLOW: 1 s FREQ--- FAST: FAST: 0.2 s / NORMAL: 0.2 s / SLOW: 3.0 s (WAVE, RMS: analog output)
- Peak sensing duration
- 2 ms or greater (during PEAK MAX/PEAK MIN and PEAK output)
- Other functions
- Auto range, Zero adjustment at power-up, Analysis display, Filter, Output amplification, Display value hold, Backlight , Auto-power save, Save settings, keypad lock
- Typical accuracy (wave output dc)
- ±2.0% rdg. ±10.8 mV (60.00 A range)
- Typical accuracy (rms output ac)
- ±2.3% rdg. ±10.8 mV (60.00 A range)
- Power supply
- LR6 alkaline batteries (AA) ×2, Continuous use: 16 h (backlight OFF and WAVE or RMS output, when used with CT7600s), Rated power 2.5 VA or AC adapter 9445-02/03 (100 to 240V AC), or 5 to 15 V DC external power supply, Rated power 2.5 VA
- Dust and water resistance *
- IP54 (with sensor connected and caps fitted to AC adapter and power connector)
- Dimensions and mass
- 52 mm (2.05 in)W × 163 mm (6.42 in)H × 37 mm (1.46 in)D, 220 g (7.8 oz) (including protector and battery)
- Included accessories
- LR6 alkaline batteries ×2, Protector ×1, Instruction manual ×1
- Categoría
- Sensores en Japón
- Subcategoría
- Ac/dc current sensors, dc to 20 khz
- ID de Anuncio
- 61137973
Descripción
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM7290 is the display and output unit for the CT7600 and CT7700 AC/DC Current Sensor series, creating a standalone clamp meter for field use or enabling waveform signals to be output to a Hioki memory recorder or logger for further analysis.
Power supply and signal output for Current Sensor CT7000 series
Simultaneous dual display of the measured values, frequency, and output rate
Four output formats to output data to loggers or other devices (via Display Unit)
Supports AC adapter, AA alkaline batteries, and external power supply
Select from an extensive lineup of sensors designed for various applications. AC/DC auto-zero current sensors are ideal for long-term recording.
By connecting an AC/DC current sensor to the Display Unit CM7290 and the Display Unit to a data logger or Memory HiCorder, you can output: