Usado classe a en Japón

CLAMP ON SENSOR 9695-03

Rated measurement current: 100 A AC | Max. measurement current: Continuous 130 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±1° (...

CLAMP ON SENSOR 9272-05

Rated current: 20 A AC, or 200 A AC (selectable) | Max. allowable input: 50 A rms (at 20 A range), 300 A rms (at 200 A range) | Frequency characteristics: 1 Hz (±2 % rdg. ±0.1 % f.s.) to 100 kHz (±30 % rdg. ±0.1 ...

AC FLEXIBLE CURRENT SENSOR CT7040 series

Rated measurement current: 6000 A AC | Internal measurement range: 600A AC/ 6000A AC (Range is controlled by main device) | Max. allowable input: 10000 A continuous (at 6000 A range, 45 to 66 Hz, requires deratin...

BE-220FSD

• Fabricante: HORIBA, Ltd.

Principle: NDIR：Non-Dispersive Infrared Spectrometry | Response time: T90 < 4.5 seconds | Sample flow: 2~3 L/min | Warm up time: 15 mins | Signal interface: RS-232C, Analog output 0-5 V or -1.8~+2.2 V | Dimens...

AC/DC CURRENT SENSOR CT6863-05

Rated current: 200 A AC/DC | Max. allowable input: 400 A rms (requires derating) | Frequency characteristics: Amplitude: DC to 500 kHz Phase: DC to 300 kHz | Amplitude and phase accuracy: DC ±0.05 % rdg. ±0.01 % ...

AC/DC CURRENT SENSOR CT7636

Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with C...

AC FLEXIBLE CURRENT SENSOR CT9667

Rated input current: 5000 A AC/ 500 A AC | Max. allowable input: 10000 A continuous (45 to 66 Hz, requires derating at frequency) | Bandwidth: 10 Hz to 20 kHz (±3dB) | Amplitude and phase accuracy: ±2 % rdg. ±0.3...

AC/DC CURRENT SENSOR CT7642

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency)) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination wi...

AC/DC CURRENT SENSOR CT7631

Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency)) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with ...

DISPLAY UNIT CM7290

Sensor: CT7642, 7742 | Measurement parameters: DC, AC, DC+AC, Hz | Crest factor: 3 at 5000 count or 2.5 at 6000 count for AC and DC+AC | Output method: WAVE, RMS, PEAK, FREQ | Input connectors: HIOKI PL 14 | Outp...

AC/DC CURRENT SENSOR CT6862-05

Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...

AC/DC AUTO-ZERO CURRENT SENSOR CT7731

Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...

AC/DC AUTO-ZERO CURRENT SENSOR CT7742

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with...

AC/DC AUTO-ZERO CURRENT SENSOR CT7736

Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...