AC FLEXIBLE CURRENT SENSOR CT7040 series en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Rated measurement current
- 6000 A AC
- Internal measurement range
- 600A AC/ 6000A AC (Range is controlled by main device)
- Max. allowable input
- 10000 A continuous (at 6000 A range, 45 to 66 Hz, requires derating )
- Bandwidth
- 10 Hz to 50 kHz (±3dB) (When used in combination with CM7290 or CM7291: 10 Hz to 1 kHz)
- Amplitude and phase accuracy
- ±1.5 % rdg. ±0.25 % f.s. (f.s. is internal range, 45 to 66 Hz) ±1 deg
- Output rate
- 1 mV/A (600 A*), 0.1 mV/A (6000 A) *Selectable only when used with CM7290, CM7291, PQ3100
- Max. rated voltage to earth
- AC 600 V (CAT IV), AC 1000 V (CAT III)
- Loop diameter
- φ 254 mm (10.00 in) or less
- Dust and water resistance *
- IP54 (when connected to a supported instrument, Do not make measurements when wet.)
- Output connectors
- HIOKI PL 14
- Operating temperature range
- -25 °C to 65 °C (-13 °F to 149 °F)
- Dimensions
- Flexible loop cable diameter: φ7.4 mm (0.29 in), Cable length: Between flexible loop and battery box: 2.3 m (7.55 ft), Output cable: 20 cm (0.66 ft), Battery box25 mm (0.98 in)W × 72 mm (2.83 in)H × 20 mm (0.79 in)D
- Mass
- 186 g (6.6 oz)
- Included accessories
- Instruction manual ×1
- Categoría
- Sensores en Japón
- Subcategoría
- Ac current sensors, up to 50 khz
- ID de Anuncio
- 61137975
Descripción
Hioki clamp sensors are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7040 Series compromise of 600A/6000A AC flexible current sensors in three different loop sizes that pair with the detachable Display Unit to measure large currents in crowded wiring and confined spaces.
CAT IV 600 V, CAT III 1000 V
Thinner cables are easier to use in confined spaces and with complicated wiring
Supports large current measurements up to 6000 A
Wide 10 Hz to 50 kHz band with excellent frequency characteristics
Choose from three conductor diameter sizes
Ideal for site inspections by using detachable Display Unit
Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz