AC/DC CURRENT SENSOR CT7642 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Rated measurement current
- 2000 A AC/DC
- Max. measurement current
- 2000 A (requires derating at frequency))
- Max. allowable peak input
- 2840 A peak
- Bandwidth
- DC to 10 kHz (-3dB) (When used in combination with CM7290 or CM7291: DC 3 Hz to 1 kHz)
- Typical phase accuracy
- ±2.3 deg. (DC < f ≤ 66 Hz)
- Output rate
- 0.1 mV/A
- Max. rated voltage to earth
- AC/DC 600 V (CAT IV) AC/DC 1000 V (CAT III)
- Core diameter
- φ 55 mm (2.17 in) or less
- Output connectors
- HIOKI PL 14
- Operating temperature range
- -25°C to 65°C (-13°F to 149°F)
- Dimensions and mass
- 64 mm (2.52 in)W × 195 mm (7.68 in)H × 34 mm (1.34 in)D, 510 g (18.0 oz), Cable length 2.5 m (8.20 ft)
- Included accessories
- None
- Categoría
- Sensores en Japón
- Subcategoría
- Ac/dc current sensors, dc to 20 khz
- ID de Anuncio
- 61137969
Descripción
Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7642 is a 2000 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis.
CAT IV 600 V
Ideal for observing instantaneous waveforms in laboratories and other temperature-controlled environments
Ideal for site inspections by using detachable Display Unit
Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz
Must be paired with the Display Unit CM7290 or CM7291 to operate as a standalone unit. Add an output cord to deliver signals to a data logger or Memory HiCorder for the following types of output:
• A DC or AC (up to 5 kHz/10 kHz) current waveform as-is (using WAVE mode for waveform output)