Building Filters
Obishi Keiki L3100 Canto recto con forma pectinada
- Fabricante: Obishi Keiki
Mie, Japón
Straight edge 3600mm
Identificación del producto: 841203YOS-43 | Fabricante: - | Año del modelo: - | Especificación: 3600mm
Tokio, Japón
HORIBA Advanced Techno Co., Ltd. F-74SP
- Fabricante: Horiba
Rango de medición: pH 0.000~14.000 | Rango de visualización: pH -2.000~19.999 | Resolución: 0.1℃ | Repetibilidad: ±0.1℃±1 dígito | Punto de calibración de ph: 5 | Verificación de repetibilidad: ○ | Límite de alar...
Kioto, Japón
MEMORY HiCORDER MR8848
Measurement functions: Memory function (waveform recording), Recorder function (peak/trough recording), X-Y Recorder function, FFT function | Max. number of channels: 16 ch analog + 16 ch logic 32 ch analog + 16 ...
Nagano, Japón
PARTIAL DISCHARGE DETECTOR ST4200
Detection method: Discharge current detection using CT and digital filters Conforms to the detection method in IEC 61934 Edition 2.0. | Test frequency range (applied voltage): 45 Hz to 1.1 kHz | Charge quantity m...
Nagano, Japón
FLYING PROBE TESTER FA1823
Número de brazos: 4 (2 de cada, arriba y abajo) | Sondas compatibles: series 1172, series CP1072, series CP1073 | Número de pasos de la prueba: Máx. 999.999 pasos | Parámetros de ensayo e intervalos de medición: ...
Nagano, Japón
advanced test R3767CG/ 14,70,71
- Fabricante: advanced test
Plazo de entrega: En stock | Opción 14: 4 puertos | Opción 70: Dominio de tiempo (software) | Opción 71: Software de ajuste de tiempo
$2,525 USDTokio, Japón
HIGH VOLTAGE MULTIPLEXER SW2001
Input channels: 2 channels of high-voltage, 2-terminal input: insulation and withstanding voltage tester input, impulse winding tester input 2 channels of low-voltage, 4-terminal input: LCR meter input, resistan...
Nagano, Japón
INSULATION TESTER ST5520
- Fabricante: HIOKI E.E
Measurement items: Insulation resistance (Applied DC voltage method) | Testing voltage: (Measurement range: AUTO/MANUAL setting is possible) 25 V ≤ V < 100 V (2.000/20.00/200.0 MΩ), 100 V ≤ V < 500 V (2.000/20.0...
Nagano, Japón
INSULATION TESTER IR4053
- Fabricante: HIOKI E.E
Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Measuring range/ accuracy: 0.200 to 500 MΩ / ±4% rdg. 501 to 2000 MΩ / ±8% rdg. | Other measuring range / accuracy: 0 to 0.199 MΩ / ±2%...
Nagano, Japón
IMPULSE WINDING TESTER ST4030A
- Fabricante: HIOKI E.E
Measurement items: • Quantification (LC value, RC value) of the response waveform obtained when impulse voltage is applied, pass / fail judgment • Waveform judgment using AREA value, Flutter, Laplacian etc. • Equ...
Nagano, Japón
IN-CIRCUIT TESTER FA1220-11
- Fabricante: HIOKI E.E
Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...
Nagano, Japón
IN-CIRCUIT TESTER FA1220-02
- Fabricante: HIOKI E.E
Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...
Nagano, Japón
INSULATION TESTER IR4056
- Fabricante: HIOKI E.E
Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...
Nagano, Japón
INSULATION TESTER IR4057-50
- Fabricante: HIOKI E.E
Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...
Nagano, Japón
