HIGH VOLTAGE MULTIPLEXER SW2001 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Input channels
- 2 channels of high-voltage, 2-terminal input: insulation and withstanding voltage tester input, impulse winding tester input 2 channels of low-voltage, 4-terminal input: LCR meter input, resistance meter input
- Output channels
- CH1 to CH4 (SW2001-04), CH1 to CH8 (SW2001-08), CH1 to CH16 (SW2001-16), CH1 to CH24 (SW2001-24) SOURCE terminal (or 2-terminal output terminals) and SENSE terminal for each channel
- Partial discharge sensor output
- AC voltage monitoring, AC partial discharge current, impulse partial discharge current (Current output is available only when equipped with current sensor ST9200 or ST9201 which are options that must be specified when ordering.) (Each is output through a BNC terminal.)
- Maximum input voltage
- Between high-voltage 2-terminal input and withstand voltage tester input terminal: 5 kV AC, 5 kV DC, 7.07 kV peak Between high-voltage 2-terminal input and impulse input terminal: 8 kV peak (impulse) Between low-voltage 4-terminal input and LCR meter input terminal or resistance meter input terminal: 30 V AC rms, 60 V DC, 42.4 V peak
- Rated output voltage
- 5 kV AC rms, 5 kV DC, 8 kV peak (impulse)
- Maximum rated terminal-to-ground voltage
- • Between high-voltage 2-terminal input and withstand voltage tester input terminal: 5 kV AC, 5 kV DC, 7.07 kV peak • Between high-voltage 2-terminal input and impulse input terminal: 8 kV peak (impulse) • Between low-voltage 4-terminal input and LCR meter input terminal or resistance meter input terminal: 30 V AC RMS , 60 V DC, 42.4 V peak
- Maximum allowable impulse current
- 100 A peak
- Primary circuit relay service life
- Open/close cycles: 5 million or more (reference value, not guaranteed)
- Functions
- Channel switching, interlock, channel delay, settings backup, panel function, communications settings mode switching, protective discharge function, accelerated discharge function
- Interfaces
- LAN, USB, EXT. I/O
- Power supply
- Rated supply voltage: 100 to 240 V AC Rated power: 120 VA
- External dimensions
- Approx. 439.2 mm (17.29 in.) W × 265.9 mm (10.47 in.) H × 770 mm (30.31 in.) D (excluding protruding parts)
- Weight
- SW2001-04: approx. 20.5 kg (723.1 oz.); SW2001-08: approx. 22.5 kg (793.7 oz.); SW2001-16: approx. 27.0 kg (952.4 oz.); SW2001-24: approx. 31.5 kg (1111.1 oz.) (All figures do not include weight from factory options ST9200/ST9201.) Add 1.2 kg (42.3 oz.) for each ST9200 and add 139 g (4.9 oz.) for each ST9201.
- Included accessories
- Power cord × 1, operating precautions × 1, startup guide × 1, support feet for installation × 4, EXT I/O connector × 1, connector for disengaging EXT I/O interlock × 1
- Categoría
- Sensores en Japón
- Subcategoría
- Partial discharge tester
- ID de Anuncio
- 101662015
Descripción
A single multiplexer that lets you consolidate six different tests
Safe switching between high-voltage testing and 4-terminal low-voltage measurement
Reliable multiplexing design with extended operational lifespan
Guaranteed measurement performance and high durability
Up to 24 channels significantly reduce connection man-hours and test time
Streamline your motor inspections by connecting multiple instruments for six different tests: resistance, inductance, surge, hipot, insulation resistance, and partial discharge (AC PD and surge PD). The multiplexer eliminates the need for frequent reconnections, in both serial motor test lines (conventional test lines) and parallel motor test lines. The SW2001 supports simultaneous testing of up to 3 three phase motors with two built-in thermistor temperature sensors.
The SW2001 employs highly durable high-voltage reed relays to reduce maintenance frequency.