HIGH VOLTAGE MULTIPLEXER SW2001
Input channels: 2 channels of high-voltage, 2-terminal input: insulation and withstanding voltage tester input, impulse winding tester input 2 channels of low-voltage, 4-terminal input: LCR meter input, resistan...
Nagano, Japón
AC/DC CURRENT SENSOR CT7822
rated measurement current: 20 A AC/DC | Max. allowable input: 30 A rms continuous (±43 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connector...
Nagano, Japón
AC/DC CURRENT SENSOR CT7812
Rated measurement current: 2 A AC/DC | Max. allowable input: 3 A rms continuous (±4.3 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connectors:...
Nagano, Japón
DATA ANALYSIS SOFTWARE UA1801
License contents: License key (USB) only *Note: Please purchase computer, display and other hardware separately and download the installer and documentation from Hioki’s website. | Supported test equipment: FA181...
Nagano, Japón
FIT-LINE INSPECTION DATA CREATION SYSTEM UA1780
Included: Installation CD, license key (USB), instruction manual (× 1 each) *Caution: Computer, monitor, and other hardware not included. | Gerber data input functions: Loading of Gerber files (RS-274X, RS-274D),...
Nagano, Japón
AC/DC CURRENT SENSOR CT6862-05
Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...
Nagano, Japón
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...
Nagano, Japón
CLAMP ON LEAK SENSOR 9657-10
Rated primary current: AC 10 A (for leak current measurement, 50/60 Hz) | Max. allowable input (45-66 hz): Max. 30 A of continuous input | Rated output current: AC 100 mV/A | Amplitude accuracy (45-66 hz): ±1.0...
Nagano, Japón
CLAMP ON SENSOR 9694
Rated measurement current: 5 A AC | Max. measurement current: Continuous 50 A (45 to 66 Hz) | Output rate: 10 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. | Phase accuracy: ±2° (45 Hz t...
Nagano, Japón
SAFETY TEST DATA MANAGEMENT SOFTWARE 9267
Compatible models: ST5520*, ST5540/ST5541, 3153, 3154, 3156, 3157, 3158, 3159, 3174, 3332, 3333, 3334, and PLCs from various manufacturers (for connection switching) *Control of the ST5520 is subject to certain l...
Nagano, Japón
LEAK CURRENT HiTESTER ST5541
Measurement methods: Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground. ...
Nagano, Japón
FlexPro
Productos hioki compatibles: MR6000, MR6000-01, MR8827, MR8740, MR8741, MR8847 (MR8847-01, MR8847-02, MR8847-03), MR8847A (MR8847-51, MR8847-52, MR8847-53), MR8875, LR8450, LR8432, LR8431, LR8410, LR8400, 8423, e...
Nagano, Japón
LAN COMMUNICATOR 9333
Supported units: - Model MR8847-51/-52/-53, MR8827 (Ver.1.00 or later) - Model MR8740 (Ver.3.12 or later), MR8741 (Ver.2.12 or later), MR8847-01/-02/-03, 8847 (Ver.3.07 or later), 8826 (Ver.2.30 or later) - Model...
Nagano, Japón
AC/DC AUTO-ZERO CURRENT SENSOR CT7742
Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with...
Nagano, Japón
AC/DC CURRENT SENSOR CT7642
Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency)) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination wi...
Nagano, Japón
Consejo: Ingrese un fabricante, modelo o palabra clave