Usado waveforms en frise

CLAMP ON PROBE 9018-50

Rated current: 10 A to 500 A AC, 6 ranges | Accuracy: ±1.5% rdg. ±0.1% f.s. (45 to 66 Hz) | Frequency characteristics: Add to amplitude accuracy : ± 1% rdg. Add to phase accuracy : ± 2.5° for frequencies from 40 ...

Central Monitoring Station

• Fabricante: MeCan

Multi-patient connectivity: The station can connect up to 32 bedside monitors, allowing for comprehensive monitoring of a large number of patients simultaneously. This enables healthcare providers to have a centr...

DIFFERENTIAL PROBE P9000

• Fabricante: HIOKI E.E

Measurement functions: Waveform monitor output only Frequency characteristics: DC to 100 kHz, -3 dB | Division ratio: 1000:1 or 100:1 (user selectable) | Dc amplitude accuracy: ±0.5% f.s. (f.s. = 1.0 V; voltage d...

IMPULSE WINDING TESTER ST4030A

• Fabricante: HIOKI E.E

Measurement items: • Quantification (LC value, RC value) of the response waveform obtained when impulse voltage is applied, pass / fail judgment • Waveform judgment using AREA value, Flutter, Laplacian etc. • Equ...

ECG Machine 3 Channel

Patient Monitor – Yonker

CLAMP ON PROBE 3276

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 100 MHz (-3 dB) | Rise time: 3.5 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max...

HEAT FLOW LOGGER LR8432

Specialized functions for heat flow measurement: - Easy scaling settings: directly enter the sensitivity of the heat flow sensor - Calculations: waveform processing function for the analysis of temperature and he...

AC/DC CURRENT SENSOR CT7636

Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with C...

MEMORY HiCORDER MR8870

• Fabricante: HIOKI E.E

Number of channels: 2 analog channels + 4 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND | Measurement ranges: 10 mV to 50 V/div (10 div full-scale), 12...

SENSOR UNIT CT9557

Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...

AC/DC CURRENT SENSOR CT7642

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency)) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination wi...

AC/DC CURRENT SENSOR CT7631

Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency)) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with ...

CURRENT PROBE CT6701

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 120 MHz (-3 dB) | Rise time: 2.9 ns or shorter | Noise level: 60 μA rms typical, 75 μA rms max (for 30 MHz band measuring instrument) | Continuous allowable input: 5 A rms (DC, and sine...

Fluke 374 FC, Clamp meter

• Fabricante: Fluke

Alcance: 2500 A | Resolución: 0,1 A (≤600 A) 1 A (≤2500 A) | Precisión: 3% ±5 dígitos (5-500 Hz) | Factor de pico (50 hz / 60 hz): 2,5 para 600 A Adicional 2% para factor de pico >2