SENSOR UNIT CT9557 en Nagano, Japón
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Connectable current sensors
- Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a current sensor equipped with a PL23 (10-pin) terminal
- Output terminal
- BNC Terminal
- Output voltage
- Waveform output/ Total waveform output: 2 V f.s. Total RMS output: 2 V DC f.s. Waveform output (4CH), total waveform output and total RMS output can be used simultaneously
- Output resistance
- 50 Ω
- Operating temperature range
- -10 °C to 50 °C (14 °F to 122 °F)
- Power supply
- AC Adapter Z1002 (100 to 240 V AC, 50/60 Hz, maximum rated power when used with sensors: 155 VA) External power supply (10 to 30 V DC; maximum rated power: 60 VA)
- Dimensions and mass
- 116 mm (4.57 in)W × 67 mm (2.64 in)H × 132 mm (5.20 in)D (excluding protruding parts),420 g (14.8 oz)
- Included accessories
- AC Adapter Z1002 ×1, Power cord ×1, Instruction manual ×1
- Subcategoría
- Power supplies for current sensors
- ID de Anuncio
- 61137989
Descripción
Power supply for high-precision current sensors with waveform output functionality
Output a single waveform from an aggregate of input waveforms
Once a current sensor has been attached to each branch cable, the CT9557 adds the sensor signals together to create a total signal. Since the sensor unit can treat multiple sensors as a single sensor, the current can be measured using a single power meter.
¿Le interesa esta máquina?
Este vendedor fue contactado 1 vez durante la semana anterior.