Usado continuous en Japón

EARTH TESTER FT6031-50

• Fabricante: HIOKI E.E

Measurement system: Two-electrode method/three-electrode method (switchable) | Measurement range: 20 Ω (0 Ω〜20.00 Ω) | Accuracy: ±1.5% rdg ±8 dgt | Earth voltage: 0〜30.0 V rms Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60...

HIGH VOLTAGE INSULATION TESTER IR5051

• Fabricante: HIOKI E.E

Measurement parameters: • Insulation resistance • PV insulation resistance • Leakage current • Voltage • Capacitance (DD function) | Max. rated voltage to terminals: 1000 V AC, 2000 V DC | Max. rated voltage to g...

HORIBA, Ltd. PX-375

• Fabricante: Horiba

Product name: Continuous Particulate Monitor with X-ray Fluorescence | Measured object: Particulate matter of black color | Measurement content: Particulate mass concentration and element concentration | Flow rat...

AC LEAKAGE CLAMP METER CM4003 (Output and external power supply function)

Ac current range: 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Basic accuracy 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Basic accur...

HORIBA Scientific Fluorolog-QM

• Fabricante: Horiba

Signal-to-noise ratio: (>35,000:1 FSD) | Data acquisition rate: 1,000,000 points/sec. to 1 point/1000 sec. | Inputs: 4 photon counting (TTL); 4 analog (+/- 10 volts); 1 analog reference channel (+/- 10 volts);...

AC LEAKAGE CLAMP METER CM4001

Ac current range: 60.00 mA/ 600.0 mA/ 6.000 A/ 60.00 A/ 600.0 A, 5 ranges (40 Hz to 1 kHz, True RMS) Basic accuracy (45-66 Hz): ±1.5% rdg ±5 dgt (60.00 mA to 6.000 A), ±2.5% rdg ±5 dgt (60.00 A to 600.0 A) Guaran...

DIGITAL PHASE DETECTOR PD3259-50

• Fabricante: HIOKI E.E

Detection functions: Positive phase, negative phase (Three-phase 3-wire, Three-phase 4-wire), open phase, prediction of ground phase (Three-phase 3-wire) | Measurement parameters: Three-phase AC voltage (line-to...

DIGITAL MULTIMETER DT4223

Dc voltage range: 600.0 mV to 600.0 V, 4 ranges, Basic accuracy: ±0.5 % rdg. ±5 dgt. | Ac voltage range: 6.000 V to 600.0 V, 3 ranges, Frequency characteristics: 40 Hz - 1 kHz Basic accuracy 40 - 500 Hz : ±1.0 % ...

AC LEAKAGE CLAMP METER CM4002

Ac current range: 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Basic accuracy 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Basic accur...

HORIBA Advanced Techno Co., Ltd. HT-110

• Fabricante: Horiba

Product name: Total organic carbon analyzer (TOC analyzer) | Measurement method: Continuous UV oxidation conductivity method | Measurement limit: 0 ppb to 1000 ppb | Measurement range: 0 ppb to 100/500/1000 ppb |...

INSULATION TESTER IR4053

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Measuring range/ accuracy: 0.200 to 500 MΩ / ±4% rdg. 501 to 2000 MΩ / ±8% rdg. | Other measuring range / accuracy: 0 to 0.199 MΩ / ±2%...

DISPLAY UNIT CM7290

Sensor: CT7642, 7742 | Measurement parameters: DC, AC, DC+AC, Hz | Crest factor: 3 at 5000 count or 2.5 at 6000 count for AC and DC+AC | Output method: WAVE, RMS, PEAK, FREQ | Input connectors: HIOKI PL 14 | Outp...

IMPEDANCE ANALYZER IM3570

Measurement modes: LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs,...

LUX METER FT3424

Standards: DIN 5032-7: 1985 class B, JIS C 1609-1: 2006 general AA class | Light receiving element: Silicon photo diode | Range selection: Auto/ Manual | Linearity: ±2% rdg. (Multiply by 1.5 for display values i...

AC CLAMP METER CM3281

Ac current range: 42.00 to 2000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy 50-60 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (...