Usado 2 cores en Japón

AC/DC CURRENT PROBE CT6830

• Fabricante: HIOKI E.E

rated measurement current: 2 A AC/DC | Max. allowable input: 3 A rms continuous (±4.3 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connectors...

AC/DC CLAMP METER CM4371-50

Dc current range: 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range) | Ac current range: 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A) | Crest fa...

AC/DC CLAMP METER CM4373-50

Dc current range: 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range) | Ac current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±1.3% rdg. ±0.3 A (at 600 A) | Crest fac...

AC/DC CLAMP METER CM4375-50

Dc current range: 1000 A, (Max. display 999.9 A) , Basic accuracy: ±1.3% rdg. ±0.3 A (at 30.1 A - 999.9 A) | Ac current range: 1000 A (Max. display 999.9 A, 10 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1...

AC/DC CURRENT SENSOR CT6904A, CT6904A-1

Rated current: 500 A AC/DC | Max. allowable input: Within the derating range, However, up to ±1000 A peak is allowable if within 20 ms. (design value) | Frequency bandwidth: Amplitude: DC to 4 MHz (CT6904A), DC t...

CLAMP ON PROBE 3275

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 2 MHz (-3 dB) | Rise time: 175 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 500 A rms (requires derating at frequency) | Max. ...

ELECTRODE RESISTANCE MEASUREMENT SYSTEM RM2610

Measurement target: Positive and negative electrode sheets for rechargeable lithium-ion batteries | Measurement parameters: Composite resistivity [Ωcm] Interface resistance (contact resistance) between the compos...

AC/DC CURRENT SENSOR CT6875A

Rated current: 500 A AC/DC | Max. allowable input: Within the derating range, up to ±1500 Apeak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 2 MHz (CT6875A), DC...

Fritsch GmbH ANALYSETTE 28 ImageSizer

• Fabricante: Fritsch

Measurement range: Dry measurement: 20 µm - 20 mm Wet measurement: 5 µm - 3 mm | Method of analysis: Dynamic Image Analysis | Type of analysis: Dry measurement of free-flowing powders and bulk solids Wet measurem...

Yumizen CA60

Range of measurement: - 0.2 to 3.5 A all Wavelengths | Wavelengths: 340, 405, 505, 535, 560, 600, 635, 670 nm | Bandwidth: 10 nm ± 2 nm | Light source: LEDs | Settings: Monochromatic and Bi-chromatic | Measuremen...

CLAMP ON SENSOR 9272-05

Rated current: 20 A AC, or 200 A AC (selectable) | Max. allowable input: 50 A rms (at 20 A range), 300 A rms (at 200 A range) | Frequency characteristics: 1 Hz (±2 % rdg. ±0.1 % f.s.) to 100 kHz (±30 % rdg. ±0.1 ...

AC FLEXIBLE CURRENT SENSOR CT9667

Rated input current: 5000 A AC/ 500 A AC | Max. allowable input: 10000 A continuous (45 to 66 Hz, requires derating at frequency) | Bandwidth: 10 Hz to 20 kHz (±3dB) | Amplitude and phase accuracy: ±2 % rdg. ±0.3...

CLAMP ON PROBE 3273-50

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max. a...

CLAMP ON PROBE 3276

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 100 MHz (-3 dB) | Rise time: 3.5 ns or shorter | Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 30 A rms (requires derating at frequency) | Max...

CLAMP ON PROBE 9010-50

Rated current: 10 A to 500 A AC, 6 ranges | Accuracy: ±2 % rdg. ±1 % f.s. (45 to 66 Hz) | Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 6 % rdg. (at 10 A and 20 A range)...