Usado 2 cores en Japón

AC/DC CURRENT SENSOR CT6904A-2, CT6904A-3

Rated current: 800 A AC/DC | Max. allowable input: Within the derating range, However, up to ±1200 A peak is allowable if within 20 ms. (design value) | Frequency bandwidth: Amplitude: DC to 4 MHz (CT6904A-2), DC...

QM-800

Light source: High efficiency continuous Xenon arc lamp. 75W standard, 150W optional | Excitation wavelength selection: Patented DeltaRAM X™ random access monochromator | Excitation wavelength range: 290–650 nm u...

HORIBA, Ltd. PD10

• Fabricante: Horiba

This product is available in the following countries and territories: China Germany Ireland Israel Italy Korea (South) Malaysia Singapore Taiwan United Kingdom United States | Weight: Approx. 950kg | Glass: 5.0 μ...

Syncerity VUV

Ccd ar coating: Without AR coating for 115 nm - 200 nm With AR coating for 135 nm - 1100 nm | Window: No window or with MgF2 window | Flange: Special flange for vacuum chamber with Viton 0-ring (Standard Syncerit...

HORIBA Scientific Syncerity BI-NIR Camera

• Fabricante: Horiba

Back illuminated ccd technology: Enhanced near infrared sensitivity QE 42% at 1000 nm. | Deep thermoelectric cooling: –50°C @ +25°C ambient (–60°C @ +25°C ambient, on request) Yields low dark current suitable for...

IN-CIRCUIT TESTER FA1220

• Fabricante: HIOKI E.E

Number of test points: Max. 1024 pins (Can be added in blocks of 128 pins.) Standard : 0 pins (Scanner boards are sold as options.) | Number of test steps: Round-robin short/open data : 1024 pins Component data :...

AC CLAMP METER CM3291

Ac current range: 42.00 to 2000 A, 3 ranges (40 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (at 4.2 V ...

AC CLAMP METER 3280-10F

Ac current range: 41.99 to 1000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. | Ac volt...

AC LEAKAGE CLAMP METER CM4003 (Output and external power supply function)

Ac current range: 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Basic accuracy 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Basic accur...

AC CLAMP METER CM3281

Ac current range: 42.00 to 2000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy 50-60 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (...

DATA ANALYSIS SOFTWARE UA1801

License contents: License key (USB) only *Note: Please purchase computer, display and other hardware separately and download the installer and documentation from Hioki’s website. | Supported test equipment: FA181...

AC LEAKAGE CLAMP METER CM4002

Ac current range: 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Basic accuracy 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Basic accur...

FLYING PROBE TESTER FA1283

Number of arms: 4 (2 each, top and bottom) | Mountable probes: 1172 series | Number of test steps: Max. 900,000 steps | Measurement parameters and measurement ranges: Resistance : | Judgment range: -99.9% to +999...

CLAMP ON EARTH TESTER FT6380-50

• Fabricante: HIOKI E.E

Measurement principle: Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi groun...

AC/DC CURRENT SENSOR CT7812

Rated measurement current: 2 A AC/DC | Max. allowable input: 3 A rms continuous (±4.3 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connectors:...