Usado tester en Japón

HORIBA Advanced Techno Co., Ltd. F-74SP

• Fabricante: Horiba

Measurement range: pH 0.000～14.000 | Display range: pH -2.000～19.999 | Resolution: 0.1℃ | Repeatability: ±0.1℃±1 digit | Ph calibration point: 5 | Repeatability check: ○ | Alarm limit of calibration: ○ | Usb peri...

Obishi Keiki L3100 Canto recto con forma pectinada

• Fabricante: Obishi Keiki

PARTIAL DISCHARGE DETECTOR ST4200

Detection method: Discharge current detection using a CT and digital filter in compliance with IEC 61934 Edition 2.0 and IEC 60034-27-5 | Test frequency range (applied voltage): 45 Hz to 1.1 kHz | Charge quantity...

SHORT-OPEN TESTER FA1221

• Fabricante: HIOKI E.E

Number of test points: 128 pins (during 4-terminal measurement, up to 32 sets) | Number of test steps: Round-robin short/open : 128 pins Component data : Max. 10000 steps Charge data : 40 sets Pin contact data : ...

advanced test R3767CG/ 14,70,71

• Fabricante: advanced test

Plazo de entrega: En stock | Opción 14: 4 puertos | Opción 70: Dominio de tiempo (software) | Opción 71: Software de ajuste de tiempo

INSULATION TESTER ST5520

• Fabricante: HIOKI E.E

Measurement items: Insulation resistance (Applied DC voltage method) | Testing voltage: (Measurement range: AUTO/MANUAL setting is possible) 25 V ≤ V < 100 V (2.000/20.00/200.0 MΩ), 100 V ≤ V < 500 V (2.000/20.0...

IN-CIRCUIT TESTER FA1220

• Fabricante: HIOKI E.E

Number of test points: Max. 1024 pins (Can be added in blocks of 128 pins.) Standard : 0 pins (Scanner boards are sold as options.) | Number of test steps: Round-robin short/open data : 1024 pins Component data :...

IMPULSE WINDING TESTER ST4030A

• Fabricante: HIOKI E.E

Measurement items: • Quantification (LC value, RC value) of the response waveform obtained when impulse voltage is applied, pass / fail judgment • Waveform judgment using AREA value, Flutter, Laplacian etc. • Equ...

INSULATION TESTER IR4053

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Measuring range/ accuracy: 0.200 to 500 MΩ / ±4% rdg. 501 to 2000 MΩ / ±8% rdg. | Other measuring range / accuracy: 0 to 0.199 MΩ / ±2%...

INSULATION TESTER IR4056

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

FLYING PROBE TESTER FA1817

Number of arms: 4 (front × 2, rear × 2) | Compatible probes: 1172 series, CP1072 series | Number of test steps: 999,999 steps | Test parameters and measurement ranges: Resistance measurement : | Judgment range: -...

SAFETY TEST DATA MANAGEMENT SOFTWARE 9267

Compatible models: ST5520*, ST5540/ST5541, 3153, 3154, 3156, 3157, 3158, 3159, 3174, 3332, 3333, 3334, and PLCs from various manufacturers (for connection switching) *Control of the ST5520 is subject to certain l...

IN-CIRCUIT TESTER FA1220-02

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

IN-CIRCUIT TESTER FA1220-11

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

test mangle

• Fabricante: Tsujii Dyeing & Weaving Co.

Rango de trabajo: 450mm