Usado continuous en Japón

VOLTAGE DETECTOR 3481

• Fabricante: HIOKI E.E

Measurement function: Voltage detection | Operating voltage range: 40 V to 600 V AC (When brought into contact with a 2 mm^2 insulated cable equivalent to 600 V polyvinyl chloride insulated wire) Maximum sensitiv...

LAN CABLE HiTESTER 3665

Measurable cable: Twisted-pair cable, characteristic impedance: 100 Ω, shielded and unshielded, CAT 3, 4, 5, 5e, 6 and 6A | Compatible connectors: RJ-45 plugs | Wire map test: Detectable errors: open, short, reve...

LCR METER IM3536

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) | Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls,...

HIGH VOLTAGE INSULATION TESTER IR5050

• Fabricante: HIOKI E.E

Measurement parameters: • Insulation resistance • Leakage current • Voltage • Capacitance (DD function) | Max. rated voltage to terminals: 1000 V AC, 2000 V DC | Max. rated voltage to ground: 1000 V (CAT IV), 600...

PENCIL HiTESTER 3246-60

Dc voltage range: 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.3 % rdg. ±4 dgt. | Ac voltage range: 4.199 V to 600 V, 4 ranges, Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt. (Average rectified) | Resistance...

ANALOG MΩ HiTESTER 3490

• Fabricante: HIOKI E.E

Rated output voltage: 250 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length 0.05 to 50 MΩ | Lower limit resistance: 0.25 MΩ | Overload protection: 660...

CLAMP ON AC/DC HiTESTER 3288

Dc current range: 100.0/ 1000 A, Basic accuracy: ±1.5 % rdg. ±5 dgt. | Ac current range: 100.0/ 1000 A, (10 Hz to 500 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 6...

UV500 IMO

Sample flow: Recommended : 0 – 5 L/min | Sample pressure: 0 – 4 Bar (0 - 1 Bar with sampling peristaltic pump) | Sample temperature: 0 °C to 80 °C 0 to 80 °C for NH4 or H2S | Wet parts material: Quartz, Polypropy...

HORIBA Advanced Techno Co., Ltd. K-11

• Fabricante: Horiba

Measurement principle: Ion Selective Electrode | Minimum sample volume: 0.3ml (0.05ml with sampling sheet B) | Measurement range: 4 to 9900 ppm (mg/L) 0.1 to 250 mmol/L 2 to 5000 kg/10a | Resolution: 0 to 99...

CLAMP ON AC/DC HiTESTER 3287

Dc current range: 10.00/ 100.0 A, Basic accuracy: ±1.5 % rdg. ±5 dgt. | Ac current range: 10.00/ 100.0 A (10 Hz to 1 kHz, True RMS) Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 600 V, 5 ra...

HORIBA Advanced Techno Co., Ltd. HE-480C

• Fabricante: Horiba

Product name: Industrial conductivity meter | Measurement method: Electrode type (2-electrode method) | Cell constant: 0.01/cm, 0.1/cm, or 1.0/cm | Temperature sensor specifications: Platinum resistance 1000 Ω/0℃...

HORIBA Advanced Techno Co., Ltd. HP-480

• Fabricante: Horiba

Product name: Industrial pH meter | Measuring range: 0 pH to 14 pH: 0.01 pH resolution. Temperature 0℃ to 100℃: 1℃ resolution (selectable display). | Transmission output: 4 mA to 20 mA DC: input/output isolated t...

Yamato RE801C-O

• Fabricante: Yamato

Motor: DC brushless motor (for rotation) | Controller: Vacuum regulator VR800 | Lift stroke: 130ｍｍ | Setting range of vacuum: 0 to 981hPa | Measurable range of vacuum: 0 to 1033hPa | Resolution of vacuum: 1hPa | ...

HORIBA Advanced Techno Co., Ltd. HP-480PL

• Fabricante: Horiba

Product name: Pulse proportional control pH meter for industrial use | Measuring range: 0 pH to 14 pH: 0.01 pH resolution. Temperature 0℃ to 100℃: 1℃ resolution (selectable display). | Transmission output: 4 mA t...

HORIBA Advanced Techno Co., Ltd. Salt-22

• Fabricante: Horiba

Measurement principle: Ion Selective Electrode | Minimum sample volume: 0.3ml (0.05ml with sampling sheet B) | Salinity range: 0.01 to 25% by weight | Resolution: 0.00 to 0.99%: 0.01% 1.0 to 9.9%: 0.1% 10 to...