Building Filters
BYPASS DIODE TESTER FT4310
Measurement items: Bypass diode comparator judgment, Bypass route resistor, Open-circuit voltage, Short-circuit current, Measurement (applied) current | Measurement object: Crystal system string Open-circuit volt...
Nagano, Japón
POWER SUPPLY 3269
Compatible sensors: The CT6710, CT6711: up to 2 units The CT6700, CT6701, 3273-50, 3274, 3275 or 3276: up to 4 units Note: Also up to 4 units for the discontinued Model 3273 | Number of power supply connectors: 4...
Nagano, Japón
SENSOR UNIT CT9557
Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...
Nagano, Japón
ELECTRODE FOR CHIP CAPACITOR SME-8360
Dimensiones: 200 mm (7.87 pulgadas) An x 520 mm (2.05 pulgadas)Al x 150 mm (5.91 pulgadas)Prof | Longitud de la punta: 85 cm (2.79 ft)
Nagano, Japón
LIQUID SAMPLE ELECTRODE SME-8330
Accesorios incluidos: Cable de conexión de 60 cm (1,97 ft) de longitud (Rojo) 0GA00029 ×1 (Negro) 0GA00030 ×1 | Dimensiones: φ 36 mm (1,42 in) × 140 mm (5,51 in)
Nagano, Japón
WEIGHT ELECTRODE SME-8320
Main electrode dia.: 50 mm (1.97 in) | Ring electrode inner-dia.: 70 mm (2.76 in) | Ring electrode outer-dia.: 80 mm (3.15 in) | Included accessories: Banana plug ×2
Nagano, Japón
ELECTRODE FOR FLAT SAMPLE SME-8311
Dimensiones: 215 mm (8,46 pulgadas) de ancho × 78 mm (3,07 pulgadas) de alto × 165 mm (6,50 pulgadas) de profundidad | Longitud de la punta: 75 cm (2.46f t)
Nagano, Japón
POWER SUPPLY 3272
Compatible sensors: The CT6700, CT6701: up to 2 units Note: When measuring the maximum peak current, only one unit The 3273-50, 3274, 3275 or 3276: up to 1 unit Note: May be used with up to 2 units of Model 3273 ...
Nagano, Japón
SENSOR UNIT CT9556
Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...
Nagano, Japón
ELECTRODE FOR SURFACE RESISTANCE SME-8302
Dimensions: φ 40 mm (1.57 in) × 115 mm (4.53 in) | Lead length: 1 m (3.28 ft) | An electrode distance: 4 mm (0.16 in)
Nagano, Japón
SURFACE RESISTANCE MEASUREMENT ELECTRODE SME-8301
Dimensiones: φ 60mm (2.36in) × 50mm (1.97in) | Longitud de la punta: 1m (3.28ft)
Nagano, Japón
ELECTRODE RESISTANCE MEASUREMENT SYSTEM RM2610
Measurement target: Positive and negative electrode sheets for rechargeable lithium-ion batteries | Measurement parameters: Composite resistivity [Ωcm] Interface resistance (contact resistance) between the compos...
Nagano, Japón
SURFACE/VOLUME RESISTANCE MEASUREMENT ELECTRODE SM9001
Dimensions: φ 100 mm (3.94 in) × 223 mm (8.78 in) | Mass: 2.5 kg (88.2 oz) | Cable length: 1 m (3.28 ft) | Included accessories: Instruction manual ×1, Counter-electrode with integrated stand ×1, Protective stand...
Nagano, Japón
SENSOR UNIT CT9555
Connectable current sensors: Current sensors with a Hioki ME15W (male) output connector (CT686x-05, 9709-05, CT684x-05, etc.) *The separately available Conversion Cable CT9900 is required in order to use a curren...
Nagano, Japón
PLATE SAMPLE ELECTRODE SME-8310
Dimensiones: 215 mm (8,46 pulgadas) de ancho × 78 mm (3,07 pulgadas) de alto × 165 mm (6,50 pulgadas) de profundidad | Longitud de la punta: 75 cm (2.46 ft)
Nagano, Japón