Usado Automatización Industrial en Nagano, Japón

HIGH VOLTAGE MULTIPLEXER SW2001

Input channels: 2 channels of high-voltage, 2-terminal input: insulation and withstanding voltage tester input, impulse winding tester input 2 channels of low-voltage, 4-terminal input: LCR meter input, resistan...

AC/DC CURRENT SENSOR CT7822

rated measurement current: 20 A AC/DC | Max. allowable input: 30 A rms continuous (±43 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connector...

AC/DC CURRENT SENSOR CT7812

Rated measurement current: 2 A AC/DC | Max. allowable input: 3 A rms continuous (±4.3 Ap) | Bandwidth: DC to 100 kHz | Basic accuracy: DC± 0.3％ rdg. ±0.1％ f.s. | Core diameter: φ 5 mm or less | Output connectors:...

CLAMP ON SENSOR 9661-01

DATA ANALYSIS SOFTWARE UA1801

License contents: License key (USB) only *Note: Please purchase computer, display and other hardware separately and download the installer and documentation from Hioki’s website. | Supported test equipment: FA181...

FIT-LINE INSPECTION DATA CREATION SYSTEM UA1780

Included: Installation CD, license key (USB), instruction manual (× 1 each) *Caution: Computer, monitor, and other hardware not included. | Gerber data input functions: Loading of Gerber files (RS-274X, RS-274D),...

AC/DC CURRENT SENSOR CT6862-05

Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...

AC/DC AUTO-ZERO CURRENT SENSOR CT7731

Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...

CLAMP ON LEAK SENSOR 9657-10

Rated primary current: AC 10 A (for leak current measurement, 50/60 Hz) | Max. allowable input (45-66 hz): Max. 30 A of continuous input | Rated output current: AC 100 mV/A | Amplitude accuracy (45-66 hz): ±1.0...

CLAMP ON SENSOR 9694

Rated measurement current: 5 A AC | Max. measurement current: Continuous 50 A (45 to 66 Hz) | Output rate: 10 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. | Phase accuracy: ±2° (45 Hz t...

SAFETY TEST DATA MANAGEMENT SOFTWARE 9267

Compatible models: ST5520*, ST5540/ST5541, 3153, 3154, 3156, 3157, 3158, 3159, 3174, 3332, 3333, 3334, and PLCs from various manufacturers (for connection switching) *Control of the ST5520 is subject to certain l...

LEAK CURRENT HiTESTER ST5541

Measurement methods: Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground. ...

FlexPro

Productos hioki compatibles: MR6000, MR6000-01, MR8827, MR8740, MR8741, MR8847 (MR8847-01, MR8847-02, MR8847-03), MR8847A (MR8847-51, MR8847-52, MR8847-53), MR8875, LR8450, LR8432, LR8431, LR8410, LR8400, 8423, e...

LAN COMMUNICATOR 9333

Supported units: - Model MR8847-51/-52/-53, MR8827 (Ver.1.00 or later) - Model MR8740 (Ver.3.12 or later), MR8741 (Ver.2.12 or later), MR8847-01/-02/-03, 8847 (Ver.3.07 or later), 8826 (Ver.2.30 or later) - Model...

AC/DC AUTO-ZERO CURRENT SENSOR CT7742

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with...