Nuevo Transformadores en China

Tapping Machine for Instrument Transformer

Vertical Bevel End Ring Cutting Machine for insulation material processing

Cable Wire double Layer Vertical Taping Machine

LZZW1-35Q hight accuracy industrial post type current transformer

Three-phase two-winding OLTC power transformer of class 66KV

LZCG930-10 cheap low voltage cast resin ring core current transformer

Normas: IEC60044-1; IEC 61869-2; NTC 2205; ANSI/IEEE C57.13; GB1206-2006; | Clase de precisión: 0,2S, 0,2, 0,5S, 0,5 (norma IEC61869-2) | Corriente primaria nominal: 30-1000A | Carga nominal: ≤30VA | Frecuencia n...

S(B) H15-M Series Sealed Amorphous Alloy Transformer

• Fabricante: Alloy

FU-80 low cost indoor single phase split core current transformer

Standards: IEC/EN60044-1 & IEC61010-1 & IEC61869-2&ANSI C57.13 | Accuracy: 0.2% , 0.5S, 0.5 % , 1% | Ratio: 1001, 10005 or 10001, customized | Nominal input current (primary current): 100a/150a/200a/250a/300a/400...

750 kva ~ 2500 kva 3 Phase Pad-mounted Transformer

FU160 3000/5a busbar split core type current transformer

Standards: IEC/EN60044-1 & IEC61010-1 & IEC61869-2&ANSI C57.13 | Accuracy: 0.2%, 0.5%, 1% | Ratio: 601, 1201 or 20001, customized | Nominal input current (primary current): 300A/400A/500A/600A/750A/800A/1000A/120...

220KV Class 3-Phase two winding power transformer NLTC

S(B) H15-M Series Amorphous Alloy Sealed Transformer

• Fabricante: Alloy

Class 10KV three-phase, dry type, epoxy resin transformer.

10KV Class Three Phase Epoxy-resin Dry-type Transformer

JSZW-10WF five leg type outdoor three phase voltage transformer

Normas: IEC60044-2; IEC 61869-1,3; ANSI/IEEE C57.13 | Tensión nominal: 10KV, 6KV | Carga nominal: ≤3×600 VA | Tensión de salida secundaria: 100 V, 110 V, 120 V, 220 V | Frecuencia nominal: 50 Hz o 60 Hz | Cosø: 0...