FU-80 low cost indoor single phase split core current transformer en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Standards
- IEC/EN60044-1 & IEC61010-1 & IEC61869-2&ANSI C57.13
- Accuracy
- 0.2% , 0.5S, 0.5 % , 1%
- Ratio
- 1001, 10005 or 10001, customized
- Nominal input current (primary current)
- 100a/150a/200a/250a/300a/400a/500a/600a/750a/800a/1000a/1200a
- Overload withstand
- 1.2 times rated current continuously
- System voltage
- 720V (0.72kV)
- Output signal
- 50mA-500mA, 1A, 5A AC optional333mV AC or 100mV-2V optional
- Burden
- 2.5VA
- Frequency range
- 40Hz... .500Hz
- Instrument security factor
- FS5
- Dielectric strength
- 2.5KV 50Hz/60Hz at 1 minute
- Output
- K1, K2 or S1, S2
- Protection level
- 3.0V0-P
- Installation category
- CAT IV 600V AC IEC/EN 61010-1
- Installation and fixation method
- Screw fixing
- Max. jaw opening
- 30mm, 55mm, 80mm
- Material
- Silicon steel sheets+enameled wire+ABS+94V-0
- Dimensions (w×d×h)(mm)
- 26×43×27; 31×50×30; 43×73×39; 60×89×43
- Weight (g)
- 400, 550, 600
- Operating temperature
- -25°C to +55°C
- Relative humidity
- 0-85% non-condensing
- Using environment
- indoor
- Altitude
- <3000 meters
- Categoría
- Transformadores en China
- Subcategoría
- Machinery
- Subcategoría 2
- Split core current transformer
- ID de Anuncio
- 84813263
Descripción
The model FU-80 is a split-core current transformer offers 333mV, 100mV-2V and 10mA-500mA ,1A or 5A at secondary from sensed primary current (0-1200A). This model has three diameter version (30mm, 55mm and 80mm), suite for all kinds of customers application.