Usado scala

HORIBA Advanced Techno Co., Ltd. RA-30

• Fabricante: Horiba

Product name: Rotating electrode polarographic residual chlorine sensor | Sensor type: RA-30 | Temperature: 0.1℃ | Linearity: Within ±0.08 mA (limited to the current linearity) | Output type: Voltage contact outp...

Cleveland Open Cup Flash Point Tester

• Fabricante: Shanghai Shengxian Instrument Equipements

1. power supply: AC 220V±10%, 50 Hz; | 2. heating device: It is a quartz tube heater, so there is no flame appears. Explosion protective; its power can be continuously adjusted in the range of 0∼600W; | 4. thermo...

HORIBA Advanced Techno Co., Ltd. SLIA-300

• Fabricante: Horiba

Principle: Molybdenum blue method | Measuring range: 0 to 2/0 to 20µg/L or 0 to 5/0 to 50 µg/L (specified when ordering) | Repeatability: ±2% of full scale | Measuring time: 5 minutes | Measuring cycle: 5 to 995 ...

MEMORY HiCORDER MR8741

• Fabricante: HIOKI E.E

Max. number of channels: 16 ch analog + 16 ch logic, or 10 ch analog + 64 ch logic (when used with built-in logic input + plug-in logic unit 8973 × 3) | Number of slots: 8 slots (Max. 8) [Limitation on number of ...

MEMORY HiCORDER MR8740

• Fabricante: HIOKI E.E

Max. number of channels: [Block I] 32 ch analog + 8 ch logic, or 29 ch analog + 56 ch logic (when used with built-in logic input + plug-in logic unit 8973 × 3) [Block II] 22 ch analog + 8 ch logic, or 19 ch anal...

Semi-rigid ruler 200 cm

Peso: 0,2 kg | Dimensiones: 200 × 10 × 10 cm

Half rigid ruler 150 cm

Semi-rigid ruler 100 cm

Measuring tape 10 m

HORIBA Advanced Techno Co., Ltd. EG-100

• Fabricante: Horiba

External dimension: 600 (W) × 400 (D) × 1150 (H) mm except for | Fresh water line*1: 0.1 MPa ～ 0.7 MPa 3 L/min for supply | Sample out line: JIS5K25A | Fresh water line: Rc 3/8 | Pah specification: select a range ...

Signal Indicators

Density meter - continuous measurement of pulp density in the flow

• Fabricante: Dredgers of Ukraine

• monthly: density sampling and, if necessary, density correction (5-10 minutes). | • once every two months: flushing, visual inspection of the bypass (20 min). | • after six months of operation: dismantling and ...

Benchtop DO Meter DO/DO Saturation/Temperature Meter

Three-phase full-wave MPI

• Fabricante: Testech Group

500 MHz Passive Probes 高壓電流探棒

• Fabricante: Tektronix