Usado tornos en mareshia

SSM 1340BV

Characteristics: SSM 1340BV | I turn over the bench: 13″ | Turning on the cross slide: 8-1/4″ | I turn over the neckline: 18-1/2″ | Width of the bed: 7 - 1/2″ | Distance between points: 40″ | Cross travel: 6-3/4″...

KLS 1840G

Characteristics: KLS 1840G | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.2″ | Width of the bed: 12 ″ | Distance between points: 40″ | Cross travel: 11.4″ | Auxili...

KLS 1740II

Characteristics: KLS 1740II | I turn over the bench: 17″ | Turning on the cross slide: 10.2″ | I turn over the neckline: 22 ″ | Width of the bed: 12 - 1/4″ | Distance between points: 40″ | Cross travel: 9.26″ | A...

KLS 1340A

Characteristics: KLS 1340A | I turn over the bench: 13″ | Turning on the cross slide: 7-1/4″ | I turn over the neckline: 18-3/4″ | Width of the bed: 7 - 3/8″ | Distance between points: 40″ | Cross travel: 6 - 1/2...

KLS 1840N

Characteristics: KLS 1840N | I turn over the bench: 11.8″ | Turning on the cross slide: 9.84″ | Distance between points: 39.4″ | Width of the bed: 13.8″ | Spindle nose: D1-6 (Opt. ASA A1-6) | Hole through the spi...

KVT 55E

Características: KVT 55E | Diámetro máximo de giro: 21.6 | Longitud máxima de giro: 19.7 | Diámetro máximo de vuelco: 29.5 | Nariz del husillo: A2-11

KVR 320X202

Características: KVR 320X202 | Desplazamiento: 60 X 32 X 28 | Velocidad del cabezal: 8000 RPM | Cono del husillo: CT-50 | Tamaño de la mesa: 63 X 28

KLM 200SM

Características: KLM 200SM | husillo secundario: SI | Diámetro máximo de giro: 11.3 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secund...

KLM 300SM

Características: KLM 300SM | husillo secundario: SI | Diámetro máximo de giro: 16.5 | Longitud máxima de giro: 24 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secundar...

HL 44

Characteristics: HL 44 | I turn over the bench: 44″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 61 ″ | Width of the bed: 24″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″ /240″ /280″ ...

HW 26

Characteristics: HW 26 | I turn over the bench: 26″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 35″ | Width of the bed: 15.75″ | Distance between points: 80″ (O 120″ / 160″) | Cross travel: 14...

ML 2060T

• Taladro del eje: 127 millimeter

Characteristics: ML 2060T | I turn over the bench: 20″ | Turning on the cross slide: 14 " | I turn over the neckline: 27.5″ | Width of the bed: 12 ″ | Distance between points: 57″ | Cross travel: 12 ″ | Auxiliary...

KLS 1760II

Characteristics: KLS 1760II | I turn over the bench: 17″ | Turning on the cross slide: 10.2″ | I turn over the neckline: 22 ″ | Width of the bed: 12 - 1/4″ | Distance between points: 60″ | Cross travel: 9.26″ | A...

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...