Usado tornos en mareshia

KLR 200

Características: KLR 200 | Diámetro máximo de giro: 13.8 | Longitud máxima de giro: 22.4/39.4 | Husillo agujero pasante: 2.44 | Chuck: 8.26

Torno CNC Hitachi Sriki Fanuc

• Fabricante: Hitachi

KVT 75E

Características: KVT 75E | Diámetro máximo de giro: 29.5 | Longitud máxima de giro: 23.6 | Diámetro máximo de vuelco: 33.4 | Nariz del husillo: A2-11

CTL 618EVS

• Taladro del eje: 25.4 millimeter

Characteristics: CTL 618EVS | I turn over the bench: 11″ | Turning on the cross slide: 6″ | I turn over the neckline: 9″ | Width of the bed: 6 - 3/4″ | Distance between points: 18″ | Cross travel: 6″ | Auxiliary ...

KLS 1860G

Characteristics: KLS 1860G | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.2″ | Width of the bed: 12 ″ | Distance between points: 60″ | Cross travel: 11.4″ | Auxili...

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

CRL 1640 CNC

Characteristics: CRL 1640 CNC | I turn over the bench: 16 " | Turning on the cross slide: 9.05″ | Distance between points: 35″ | Width of the bed: 10.23″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole throug...

KLS 1220N

Characteristics: KLS 1220N | I turn over the bench: 11.8″ | Turning on the cross slide: 5.3″ | Distance between points: 19.6″ | Width of the bed: 13.8″ | Spindle nose: D1-4 | Hole through the spindle: 1.49″ | Spi...

KVT 100E

Características: KVT 100E | Diámetro máximo de giro: 39.3 | Longitud máxima de giro: 27.5 | Diámetro máximo de vuelco: 43.3 | Nariz del husillo: A2-11

KLM 200S

Características: KLM 200S | husillo secundario: SI | Diámetro máximo de giro: 10.2 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secunda...

KLS 1860V

Characteristics: KLS 1860V | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.5″ | Width of the bed: 13″ | Distance between points: 60″ | Cross travel: 11″ | Auxiliary...

MD 70

Characteristics: MD 70 | Height of centers: 35″ | I turn over the bench: 70″ | Turning on the cross slide: 53″ | Width of the bed: 52″ | Distance between points: 120″ - 480″ | Spindle edge diameter: Ø 9″ (Opt. Ø ...

MD 55

Characteristics: MD 55 | Height of centers: 27.5″ | I turn over the bench: 55″ | Turning on the cross slide: 40″ | Width of the bed: 32″ | Distance between points: 80″ - 320″ | Spindle edge diameter: Ø 9″ (Opt. Ø...