Usado tester en Nagano, Prefectura de Nagano, Japón

LEAK CURRENT HiTESTER ST5540

Measurement methods: Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground....

SUPER MΩ HiTESTER SM7810

Number of channels: 8 channels (parallel and simultaneous measurement) | Applied voltage: Supply voltage from external power source (voltage input terminal on the rear panel) | Measurement range: Current: 1 pA to...

PENCIL HiTESTER 3246-60

Dc voltage range: 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.3 % rdg. ±4 dgt. | Ac voltage range: 4.199 V to 600 V, 4 ranges, Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt. (Average rectified) | Resistance...

CARD HiTESTER 3244-60

Dc voltage range: 419.9 mV to 500 V, 5 ranges, Basic accuracy: ±0.7 % rdg. ±4 dgt. | Ac voltage range: 4.199 V to 500 V, 4 ranges, Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt. (Average rectified) | Resistanc...

POWER SOURCE UNIT SM7860

Supported device: Super MΩ HiTester SM7810 Object to which voltage is applied: MLCC (the Multilayer Ceramic Capacitor) | Generation accuracy: Output voltage accuracy: ±2% of set value ± 0.5 V (with no load) Inter...

SUPER MEGOHM METER SM7420

Number of channels: 4 ch | Dc current measurement: 20 pA range (0.1 fA resolution), Accuracy: ±(2.0 % of rdg. +30 dgt.) 200 pA range (1.0 fA resolution), Accuracy: ±(1.0 % of rdg. +30 dgt.) 2 nA range (10 fA re...

C METER 3506-10

Measurement parameters: C (Capacitance), D (loss coefficient, tan δ), Q (1/tan δ) | Measurement range: C: 0.001 fF to 15.0000 μF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9 | Basic accuracy: (Typ.) C: ±0.14 % rdg.,...

SUPER MEGOHM METER SM7120

Number of channels: 1 ch | Dc current measurement: 20 pA range (0.1 fA resolution), Accuracy: ±(2.0 % of rdg. +30 dgt.) 200 pA range (1.0 fA resolution), Accuracy: ±(1.0 % of rdg. +30 dgt.) 2 nA range (10 fA re...

LCR METER IM3523A

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) | Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls,...

RESISTANCE METER RM3542A

Resistance range: [at Low Power OFF] 100 mΩ range (Max. 120.0000 mΩ, 0.1 μΩ resolution) to 100 MΩ range (Max. 120.0000 MΩ, 100 Ω resolution), 16 steps [at Low Power ON] 1000 mΩ range (Max. 1200.000 mΩ, 1 μΩ resol...

VOLTAGE DETECTOR 3481

• Fabricante: HIOKI E.E

Measurement function: Voltage detection | Operating voltage range: 40 V to 600 V AC (When brought into contact with a 2 mm^2 insulated cable equivalent to 600 V polyvinyl chloride insulated wire) Maximum sensitiv...

Slurry Analytical System (Cloud-based Analysis Software)

• Fabricante: HIOKI E.E

System requirements (computer): Memory: 512 MB or more Hard disk: 1 GB or more of available space Display: 1,024 × 768 dots or more, 65,536 colors or more Interface: USB 2.0 or more to be installed OS: Windows 8....

INFRARED THERMOMETER FT3700, FT3701

Measurement temperature range: -60.0˚C to 550.0˚C (-76˚F to 1022˚F), 0.1˚C resolution | Accuracy: -35.0˚C to -0.1˚C (-31.0˚F to 31.9˚F) : ±10 %rdg. ±2˚C 0.0˚C to 100.0˚C (-32.0˚F to 212.0˚F) : ±2˚C 100.1˚C to 500...

CHEMICAL IMPEDANCE ANALYZER IM3590

Measurement modes: LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysi...

AC/DC CURRENT BOX PW9100A

• Fabricante: HIOKI E.E

Measurement line type: Isolated input, DCCT input | Rated primary current: 50 A AC/DC | Number of input channels: PW9100A-3: 3 channels PW9100A-4: 4 channels | Maximum input current: 60 A, within derating. Howeve...