Usado classe a en Japón

CLAMP ON ADAPTER 9290-10

• Fabricante: HIOKI E.E

Rated primary current: AC 1000 A continued (Maximum 1500 A for 5 minutes or shorter) | Rated secondary current: AC 100 A (10 : 1 CT ratio) | Amplitude accuracy: ±1.5% rdg. | Phase accuracy: ±1.0° or less | Freque...

Mitsubishi Mini-tiller machine management machine MSD656 First grade maintenance current model Supreme goods

• Fabricante: Mitsubishi

Mitsubishi Mini-tiller machine management machine MSD658 First grade maintenance Current type finest goods

• Fabricante: Mitsubishi

HORIBA Scientific iHR Series

• Fabricante: Horiba

CLAMP ON AC/DC HiTESTER 3287

Dc current range: 10.00/ 100.0 A, Basic accuracy: ±1.5 % rdg. ±5 dgt. | Ac current range: 10.00/ 100.0 A (10 Hz to 1 kHz, True RMS) Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 600 V, 5 ra...

AC FLEXIBLE CURRENT SENSOR CT7040 series

Rated measurement current: 6000 A AC | Internal measurement range: 600A AC/ 6000A AC (Range is controlled by main device) | Max. allowable input: 10000 A continuous (at 6000 A range, 45 to 66 Hz, requires deratin...

Yoshinori agricultural machine paddy field riding grooving machine JM-410 First grade maintenance completed wheels new article

• Fabricante: Yoshinori

Iseki 8 Section Rice Planting Machine Sanoa PA83 Double Rear Wheel with Monroe 724H Mint

• Fabricante: Iseki
• Modelo: PA83

AC CLAMP METER CM3291

Ac current range: 42.00 to 2000 A, 3 ranges (40 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (at 4.2 V ...

HORIBA France SAS LabRAM Soleil

• Fabricante: Horiba

FHR Series

Focal length: 1000 mm | Entrance aperture ratio (single grating): f/9.0 | Dual grating: 80 mm x 110 mm | Scanning range: 0 – 1500 nm | Scanning speed: > 300 nm/second | Spectral dispersion: 0.8 nm/mm | Spectra...

CLAMP ON PROBE 3274

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 10 MHz (-3 dB) | Rise time: 35 ns or shorter | Noise level: 25 mA rms max. (bandwidth limited to 20 MHz) | Continuous allowable input: 150 A rms (requires derating at frequency) | Max. ...

AC/DC CURRENT SENSOR CT6863-05

Rated current: 200 A AC/DC | Max. allowable input: 400 A rms (requires derating) | Frequency characteristics: Amplitude: DC to 500 kHz Phase: DC to 300 kHz | Amplitude and phase accuracy: DC ±0.05 % rdg. ±0.01 % ...

SENSOR UNIT CT9556

Sensores de corriente conectables: Sensores de corriente con conector de salida Hioki ME15W (hombre) (CT686x-05, 9709-05, CT684x-05, etc.) *Se requiere el Cable de Conversión CT9900, que se vende por separado, pa...

CURRENT PROBE CT6710

• Fabricante: HIOKI E.E

Frequency bandwidth: DC to 50 MHz (-3 dB) | Rise time: 7.0 ns or shorter | Delay time (typical): 30 A range: 12 ns, 5 A range: 12 ns, 0.5 A range: 13 ns (Delay time relative to rising waveform of input signal 1...