Usado system sensor en Japón

POWER ANALYZER PW8001

Measurement lines: 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire | No. of pw8001 input units: Max. 8 units (mix and match) | Type of input unit: U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT...

Yamato DP610

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 100 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate with baking coating | Do...

Yamato DP300

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 120 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate with baking coating | Do...

Yamato DP410

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 80 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate with baking coating | Doo...

Yamato DP200

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 60 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate baking coating | Door: Si...

AC/DC CURRENT PROBE CT6843A

Rated current: 200 A AC/DC | Frequency bandwidth: DC to 700 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±600 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6845A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 200 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1500 A peak (Within 20 ms in an environment of 40°C/104°F or ...

AC/DC CURRENT PROBE CT6844A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 500 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±800 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6841A

Rated current: 20 A AC/DC | Frequency bandwidth: DC to 2 MHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±60 A peak (Within 20 ms in an environment of 40°C/104°F or less)...

HORIBA STEC, Co., Ltd. VC Series

• Fabricante: Horiba

Liquids supported: TEOS, P(OCH3)3, C6F6 | Temperature rise: Max. 150°C | Pressure generated*1: Reduced pressure | External leak integrity: 1.0x10-8Pa·m3/s | Internal leak integrity: 1.0x10-6Pa·m3/s | Wetted matel...

UV500 ATEX

Sample flow: Recommended : 0 - 5 L/MIN 0 – 0.5 l/min for NH4 or H2S | Sample pressure: 0 - 4 Bar (0 - 1 Bar with sampling peristaltic pump) 0 - 0.5 Bar for NH4 or H2S | Sample temperature: 0 °C to 80 °C 0 - 30 °C...

HORIBA Advanced Techno Co., Ltd. HE-200H

• Fabricante: Horiba

Product name: Conductivity meter | Sensors in combination: 4-electrode method conductivity sensor (FES Series) of cell constant 0.1/cm, or 1.0/cm | Display range: 0.0 to 220.0 | Temperature: 0.01℃ | Nacl: 0.0% to...

HORIBA Advanced Techno Co., Ltd. HE-200C

• Fabricante: Horiba

Product name: Conductivity meter | Sensors in combination: 2-electrode method conductivity sensor ESH, ESD, ESL, and FS Series sensor of cell constant 0.01/cm,0.1/cm, or 1.0/cm | Temperature: 0.01℃ | Linearity: W...

HORIBA STEC, Co., Ltd. MV-2000

• Fabricante: Horiba

Liquid material: All liquids except those corrosive to stainless steel(ex. HCl, HF) | Setting temperature: By vaporization conditions(Control Valve : Max 140 ˚C Vaporizer : Max 200 ˚C) | Leak integrity: ≤ 1 × 10-...

CLAMP ON POWER LOGGER PW3360

• Fabricante: HIOKI E.E

Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 c...