Yamato TS101
- Fabricante: Yamato
Temp. setting range: 0deg.C to 500 deg.C | Temp. display range: -200deg.C to 1300deg.C | Temp. detection accuracy: ±1deg.C | Power breaking capacity: AC100V 50/60 Hz 14.5A Single phase | Temp. setting system: Dig...
Tokio, Japón
Yamato TS310
- Fabricante: Yamato
Temp. setting range: 0deg.C to 500deg.C | Temp. display range: -200deg.C to 1300deg.C | Temp. detection accuracy: ±1deg.C | Power breaking capacity: AC100V 50/60 Hz 30A AC200V 50/60 Hz 30A AC200V 3-phase 50/60 Hz...
Tokio, Japón
HORIBA STEC, Co., Ltd. PV Series
- Fabricante: Horiba
Flow range: 10/20 LM | Flow control range: 2 -100% F.S. | Valve type: normally open / close | Input signal: 0 - 5VDC | Responce: less than 0.5 sec. | Operating temperature: 0 - 50 °C | Operating diffential pressu...
Kioto, Japón
Yamato GAS410
- Fabricante: Yamato
- Modelo: GAS410
Solvent recovery system: Capacitor + freezer | Circulating gas: N2 gas (sealed circulation when connected to ADL311SA or GB-210A) | Circulating volume flow: 0.12 to 0.65m3/min | Compressor (for spraying): Linear ...
Tokio, Japón
HORIBA STEC, Co., Ltd. MV-2000
- Fabricante: Horiba
Liquid material: All liquids except those corrosive to stainless steel(ex. HCl, HF) | Setting temperature: By vaporization conditions(Control Valve : Max 140 ˚C Vaporizer : Max 200 ˚C) | Leak integrity: ≤ 1 × 10-...
Kioto, Japón
Yamato DL410
- Fabricante: Yamato
- Modelo: DL410
Water evaporation rate: Max. approx. 3,000 ml/h | Temperature control range: 40°C - 300°C at inlet | Dry air flow rate: 0.3 - 1.0 m³/min | Spraying system: Two-way nozzle (Dia. of orifice: 0.7mm) Nozzle No.3 stan...
Tokio, Japón
Yamato DF832
- Fabricante: Yamato
Fan motor: Axial flow fan (capacitor motor: 20W) | Cable port: I.D. ø30mm (rear) | Heat insulator: Glass wool | Other additional structure: Exhaust damper (manual operation) | Safety device: Self-diagnostic funct...
Tokio, Japón
Yamato BO400
- Fabricante: Yamato
Operating temp. range: Room temp. +10 to 180°C | Temp. control accuracy: ±2°C (at agitation) | Temp. control system: PlD control by microprocessor | Temp. setting / display method: Digital setting by ▲/▼ keys | O...
Tokio, Japón
Yamato BO410
- Fabricante: Yamato
Operating temp. range: Room temp. +10 to 180°C | Temp. control accuracy: ±2°C (at agitation) | Temp. control system: PlD control by microprocessor | Temp. setting / display method: Digital setting by ▲/▼ keys | O...
Tokio, Japón
Yamato DH832
- Fabricante: Yamato
System: Forced air circulation and ventilation | Operating temp. range: Room temp. +15°C~300°C | Temperature fluctuation: 3.0°C (at 300°C) | Temperature slope: 18°C (at 300°C) | Temperature controller: PID contro...
Tokio, Japón
Yamato DH1032
- Fabricante: Yamato
System: Forced air circulation and ventilation | Operating temp. range: Room temp. +15°C~300°C | Temperature fluctuation: 3.0°C (at 300°C) | Temperature slope: 18°C (at 300°C) | Temperature controller: PID contro...
Tokio, Japón
Yamato DF1032
- Fabricante: Yamato
Fan motor: Axial flow fan (capacitor motor: 20W), Two motors used for Model 1032 | Cable port: I.D. ø30mm (rear) | Heat insulator: Glass wool | Other additional structure: Exhaust damper (manual operation) | Safe...
Tokio, Japón
Yamato ADL311-A
- Fabricante: Yamato
Temp. adjusting unit setting range: 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1deg.C | Drying air amount adjusting range: 0〜0.7m3/mi...
Tokio, Japón
Yamato GB210-B
- Fabricante: Yamato
Temp. adjusting range: 40 to 220°C (inlet temperature), 0 to °60(Outlet temperature) | Temperature adjusting accuracy: Inlet temperature ± 1°C | Spraying system: Two-way nozzle, Nozzle No. 1A as standard | Drying...
Tokio, Japón
Yamato ADL311S-A
- Fabricante: Yamato
Temp. adjusting unit setting range: 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1°C | Drying air amount adjusting range: 0 to 0.7m3/min | Sp...
Tokio, Japón
Consejo: Ingrese un fabricante, modelo o palabra clave