Usado Tornos Cnc

TORNO CNC HITACHI SEIKY

• Fabricante: Hitachi

Torno CNC WNCL – 20 FEMCO

• Fabricante: Femco

Torno CNC Hardinge Conquest 42

• Fabricante: Hardinge
• Modelo: CONQUEST 42

KLS 1840N

KLR 600

Características: KLR 600 | Diámetro máximo de giro: 35.4 | Longitud máxima de giro: 43.3/55/82 | Husillo agujero pasante: 5.15 | Chuck: 15

KLR 400

Características: KLR 400 | Diámetro máximo de giro: 26.8 | Longitud máxima de giro: 43.3/55/82 | Husillo agujero pasante: 5.15 | Chuck: 15

KVT 100E

Características: KVT 100E | Diámetro máximo de giro: 39.3 | Longitud máxima de giro: 27.5 | Diámetro máximo de vuelco: 43.3 | Nariz del husillo: A2-11

KLM 200S

Characteristics: KLM 200S | Secondary spindle: YES | Maximum turning diameter: 10.2 | Maximum turning length: 19.5 | Spindle through hole (main / secondary): 2.04 / 1.77 | Chuck (main / secondary): 8 / 6

KLR 300

KLS 1860V

Characteristics: KLS 1860V | I turn over the bench: 18��� | Turning on the cross slide: 10.8��� | I turn over the neckline: 27.5��� | Width of the bed: 13��� | Distance between points: 60��� | Cross travel: 11���...

MD 70

MD 55

Characteristics: MD 55 | Height of centers: 27.5��� | I turn over the bench: 55��� | Turning on the cross slide: 40��� | Width of the bed: 32��� | Distance between points: 80��� ��� 320��� | Spindle edge diameter...

MD 63

HL 37

Characteristics: HL 37 | I turn over the bench: 37.8��� | Turning on the cross slide: 24.2��� | I turn over the neckline: 54-3/8��� | Width of the bed: 24��� | Distance between points: 120��� (Opt 80��� / 160��� ...

HR 35

Characteristics: HR 35 | I turn over the bench: 34.6��� | Turning on the cross slide: 25.2��� | I turn over the neckline: 46��� | Width of the bed: 19��� | Distance between points: 120��� (Opt 80��� / 160��� / 20...