
12AC ROCKERSHOVEL
- Fabricante: Eimco
- Capacidad de la pala: 0.13 cubic metre
Masa operativa: 1950KG | Longitud: 1910MM | Anchura: 670MM | Altura: 1240MM | Altura de descarga: 1240MM | Ancho de vía: 457MM-915MM | Capacidad del cubo: 0,13 METROS CÚBICOS | Altura máxima: 1970MM | Limpiar el ...
Germiston, Sudáfrica
Reflux Extraction Test Set (UTAS-0013)
Normas: ASTM D2172; AASHTO T164 B | Utas-0013: Juego de prueba de extracción por reflujo 1000 g, 220-240 V 50-60 Hz | Utas-0014: Jarra extractora por reflujo 1000 g | Utas-0015: Condesador de reflujo 1000 g | Uta...
Alberton, Sudáfrica
STC 4 x Bosch Professional GRW 18-2E agitador
- Fabricante: Bosch
- Modelo: GRW18
Midrand, Sudáfrica
4 x Bosch Professional GRW 18-2E Stirring Mechanis
- Fabricante: Bosch
- Modelo: GRW18
Midrand, Sudáfrica
SYSFORM 50E / 70E
- Fabricante: Sysform
Johannesburgo, Sudáfrica
SYSFORM ST-50 / ST-70
- Fabricante: Sysform
Johannesburgo, Sudáfrica
26B ROCKERSHOVEL
- Fabricante: Eimco
- Capacidad de la pala: 0.35 cubic metre
Operating mass: 4840KG | Length: 2820MM | Width: 1005MM | Height: 1635MM | Discharge height: 1240MM | Rail gauge: 580MM-1120MM | Bucket capacity: 0.35 CUBIC METERS | Maximum height: 2855MM | Clean up width: 3160MM
Germiston, Sudáfrica
12E ROCKERSHOVEL
- Fabricante: Trident
- Capacidad de la pala: 0.13 cubic metre
Operating mass: 1950KG | Length: 1910MM | Width: 670MM | Height: 1240MM | Discharge height: 1240MM | Rail gauge: 457MM-915MM | Bucket capacity: 0.13 CUBIC METERS | Maximum height: 1970MM | Clean up width: 1880MM
Germiston, Sudáfrica
Sieve Segregation Test Set (UTC-0518)
Normas: EN 12350-11 | Utc-0518: Conjunto de Prueba de Segregación por Tamiz | Utg-4pc0050/y: Tamiz Ø 300×75 mm Abertura Cuadrada de 5 mm | Utg-4002/y: Bandeja Ø 300×75 mm | Dimensiones: 350x350x250 mm | Peso (apr...
Alberton, Sudáfrica
Length Change of Hardened Concrete and Hydraulic-Cement Mortar (UTC-1153)
Normas: ASTM-C157, C1105 | Utc-1153: Molde de contracción de un mando 75x75x285 mm | Utc-1155: Molde de contracción de dos mandos 75x75x285 mm | Utc-1161: Molde de contracción de un mando 100x100x285 mm | Utc-117...
Alberton, Sudáfrica
Marshall Manual Compaction Assembly (UTAS-0670)
- Fabricante: Marshall
Normas: ASTM D6926, D5581; AASTHO T245 (solo para UTAS-0071); BS-598 | Utas-0670: 350x400x1600 mm | Utas-0671: 100x100x108 mm | Utas-0672: 350 x400x1600 mm | Utas-0674: 100x100x108 mm | Utas-0676: 350x400x1600 mm...
Alberton, Sudáfrica
$49,059 USDJohannesburgo, Sudáfrica
Fermel TMech - Load Haul Dumper 400LP
- Fabricante: Fermel
Gauteng, Sudáfrica
Fermel T-Mech Cargador de Volquetes 780 LP
- Fabricante: Fermel
Gauteng, Sudáfrica
Fermel MED - Scaler Breaker LP
- Fabricante: Fermel
Gauteng, Sudáfrica

