Usado compressore en Corea del Sur

2016 Compressor

2) compresor de aire (eugene): 2 juegos | Separador de aceite/agua: 0.98Mpa | Secador de aire desecante: SMD-100 | 3) compresor de aire (eugene): 1set

YOUNG IN Chromass Mistral Evolution (Built-in Compressor)

• Fabricante: YOUNG IN Chromass

YOUNG IN Chromass Whisper Nitrogen Generator (External Compressor)

• Fabricante: YOUNG IN Chromass

2012 Comp Korea COMPRESSOR

• Fabricante: Comp Korea

Potencia: 75kw

2012 Shinil PBC Air Compressor

• Fabricante: Shinil PBC

Motor: 150KW | Presión: 35kg/㎠ | Tapa: 18㎠/min

2018 domestic Powder iron compressor

• Fabricante: domestic

Cap': 1,000Ton | Capacidad de entrada: Φ300 × 600 mm | Tubo: diámetro interior Φ750×950ST | Tolva de alimentación: método de alimentación por tornillo | Cilindro rápido: Φ150 × 950ST | Molde rápido: Φ280 × 450mm ...

2018 Domestic Powder Iron Compressor

• Fabricante: Domestic

Cap': 800Ton | Capacidad de entrada: Φ300 × 600 mm | Tubo: diámetro interior Φ650 × 950ST | Tolva de alimentación: método de alimentación por tornillo | Cilindro rápido: Φ150 × 950ST | Molde rápido: Φ270 × 450 mm...

2020 Hagi Co., Ltd. Can Compressor and Aluminum Recycling Processing Line

• Fabricante: Hagi Co., Ltd.

Pistón: Φ400×2 | Grosor de la placa de prensado: 240mm

Auto Rebar Bending System(KBS-16-2)

Oil tank: 1.5kw | Compressor: 0.75kw | Electric: 220V / 380V 3Phase | Bending capacity: D10~D16 | Bending angle: 15˚~ 135˚ | Working speed: 2.5sec/135˚ 8.1rpm | Loading capacity (kg): 1,000kg | Dimensions (m/m)(l...

Auto Rebar Bending System(KBS-25-5 KBS-25-5A)

Supply table: 0.75kw X 1 (KBS-25-5A) 1.5kw X 1 | Compressor: 3.75kw X 1 | Electric: 220V/380V 3Phase | Bending capacity: D10~D25 | Bending angle: 15˚~ 180˚ | Working speed: 5sec/180˚ 6.3rpm | Supply table speed: ...

Auto Rebar Bending System(KBS-16-5)

Supple table: 0.75kw x 1 | Compressor: 2.25kw ×1 | Electric: 220V / 380V 3Phase | Bending capacity: D10~D16 | Bending angle: 15˚~ 180˚ | Working speed: 4sec/180˚ 9.5rpm | Supply table speed: 7.2m/min | Loading ca...

Semiautomatic Rebar Cutting System(KMC-42AS)

• Fabricante: KMC

Feed conveyor unit: 0.75kw×3 | Compressor: 2.25kw×1 | Electric: 220V / 380V 3Phase | R p m: 27rpm | Feed conveyor speed: 39mm/min | Blade width: 166mm×80×35 | Cutting length (mm): 500 (min) ~ 6,000 (max) | Loadin...

Auto Rebar Bending System(KBS-32-2DS)

Supply table: 1.5kw X 1 | Head transfer: 0.75kw X 2 | Compressor: 2.25kw X 1 | Electric: 380V 3Phase | Bending capacity: D10 ~ D32 | Bending angle: 15˚~ 180˚ | Working speed: 2.8sec/180˚ 10.8rpm | Supply table sp...

Auto Rebar Cutting System(KMC-60DS:Touch Screen Type)

• Fabricante: KMC

Feed conveyor unit: 1.5kw×2 | Supply table unit: 1.5kw×4 | Compressor: 7.5kw×1 | Electric: 220V / 380V 3Phase | R p m: 27rpm | Feed conveyor speed: 49mm/min | Blade dimension: 300mm×100×50 | Cutting length (mm): ...

Auto Rebar Cutting System(KMC-60AS)

• Fabricante: KMC

Feed conveyor unit: 1.5kw×2 | Supple table: 1.5kw×4 | Compressor: 7.5kw×1 | Electric: 220V / 380V 3Phase | R p m: 27rpm | Feed conveyor speed: 49m/min | Blade dimension: 300mm×100×50 | Cutting length (mm): 600 (m...