Building Filters
UF Technology for Drinking Water System
- Fabricante: Hinada Water Treatment Tech
Chenzhou, China
UF Technology for Drinking Water System
- Fabricante: Hinada Water Treatment Tech
Chenzhou, China
Brackish Water Reverse Osmosis RO Membrane Element
Model item: Parameters | Hnd-bw-8040f: HND-BW-4040F | Structure: Rolled/ Low Fouling Spiral Wound | Channel width (mil): 34 | Operating pressure (mpa): 1.55 | Test temperature (℃): 25 | Recovery per element: 15% ...
Chenzhou, China
Lab-Scare Test MBR Membrane
- Fabricante: Hinada Water Treatment Tech
Material: Reinforce PVDF hollow fiber(PET+PVDF) | I/o diameter: 1.0/2.2mm | Operation mode: Outside-in | Water permeability: 10—25 L/m2. h | Operating temperature: 5℃-45℃ | Ph: 2-11 | Pore size: 0.06um (Micron) |...
Chenzhou, China
EDI Module (Electrodeionization System)
- Fabricante: EDI
Raw water: Output of RO System, the Conductivity ≤ 10 μ/ cm | Ph value: 6.5—7.5 | Temperature: 5℃–38℃ | Working pressure: 0.15—0.4MPa | Hardness: ≤1ppm(Take CaCO3 as sample test) | Organic matter: TOC ＜0.5ppm,it’...
Chenzhou, China
High Purity Water Systems - Electrodeionization System
- Fabricante: Hinada Water Treatment Tech
Raw water: Output of RO System, the Conductivity ≤ 10 μ/ cm | Ph value: 6.5—7.5 | Temperature: 5℃–38℃ | Working pressure: 0.15—0.4MPa | Hardness: ≤1ppm(Take CaCO3 as sample test) | Organic matter: TOC ＜0.5ppm,it’...
Chenzhou, China
RO Membrane 8040 ULP-4040
Permeate flow: 11000 gpd(40m3/d) | Salt rejection: 99.4%--99.7% | Configuration: Low Fouling Spiral Wound | Membrane polymer: PA (polyamide) Thin Film Composite | Membrane active area: 400 ft2 (39.7 square meter)...
Chenzhou, China
Seawater Desalination RO Membrane
Active membrane area: 400ft2 (37.2m²) | Permeate flow: 9000 gpd(34m3/d) | Rejection rate: 99.8% | Salt rejection: 99.4%–99.8% | Configuration: Low Fouling Spiral Wound | Membrane polymer: PA (polyamide) Thin Film...
Chenzhou, China
15KLPH Industrial RO System for Underground Water Filtration
Ro salt rejection: ≥98.5% | Recovery rate: 65-70% | Ro system rated flux: ≥15m3/h | Working temperature: 5-40 degree / PH: 6.0—8.0 | Power: AC380V/50HZ /3phase (optional)
Chenzhou, China
Chenzhou, China
Chenzhou, China
30 m3/ Day Submerged Membrane Bioreactor
Item: Specification | Working temperature: 5—45℃ | Ph: 2-12 | Input ss: ≤ 2mm | Oil grease: ＜5mg/L | Hard (caco3 mg/l): Too much CaCO3 will harden the Hollow fibers. | Mbr model: NM-RMBR-1010 | Area for each unit...
Chenzhou, China
Membrane Bioreactor NM-RMBR-1010
Material: PVDF, PET non-woven fabric and ABS resin | Membrane area per element (m2): 10 m2 | Membrane element dimension: Height: 1100mm | Filtration method: Suction /Outside-in | Hollow fibers i /o diameter: 1.0 ...
Chenzhou, China
Submerged MBR Membrane NM-RMBR-1520
Material: PVDF, PET non-woven fabric and ABS resin | Membrane area per element (m2): 20 m2 | Membrane element dimension: Height: 1535mm | Filtration method: Suction /Outside-in | Hollow fibers i /o diameter: 1.0 ...
Chenzhou, China
Submerged MBR Membrane NM-RMBR-1530
Size (lxwxh, mm): 1250 × 30 ×2000 | Membrane area (m2): 30 | Design flux (l / h): 300-750 | Working pressure (kpa): 10-50 | Operating temperature (° c): 5-45 | Work ph: 1-10 | Hollow fibers: reinforced PVDF
Chenzhou, China