Building Filters

Usado cnc en Nuevo León, México

CRL 1640 CNC
Characteristics: CRL 1640 CNC | I turn over the bench: 16 " | Turning on the cross slide: 9.05″ | Distance between points: 35″ | Width of the bed: 10.23″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole throug...
Santiago, México
CSM 1440 CNC
Characteristics: CSM 1440 CNC | I turn over the bench: 14 " | Turning on the cross slide: 8-5/8″ | Distance between points: 40″ | Width of the bed: 8.1″ | Spindle nose: Camlock D1-4 (Opt. ASA A1-4) | Hole through...
Santiago, México
KLS 1840N
Characteristics: KLS 1840N | I turn over the bench: 11.8″ | Turning on the cross slide: 9.84″ | Distance between points: 39.4″ | Width of the bed: 13.8″ | Spindle nose: D1-6 (Opt. ASA A1-6) | Hole through the spi...
Santiago, México
CNL 1740
Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...
Santiago, México
CHL 21 SERIES
Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...
Santiago, México
CHC 22 SERIES
Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...
Santiago, México
CSC 18 SERIES
Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....
Santiago, México
KLS 1220N
Characteristics: KLS 1220N | I turn over the bench: 11.8″ | Turning on the cross slide: 5.3″ | Distance between points: 19.6″ | Width of the bed: 13.8″ | Spindle nose: D1-4 | Hole through the spindle: 1.49″ | Spi...
Santiago, México
KVT 100E
Características: KVT 100E | Diámetro máximo de giro: 39.3 | Longitud máxima de giro: 27.5 | Diámetro máximo de vuelco: 43.3 | Nariz del husillo: A2-11
Santiago, México
KLM 200S
Características: KLM 200S | husillo secundario: SI | Diámetro máximo de giro: 10.2 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secunda...
Santiago, México
KLR 600
Características: KLR 600 | Diámetro máximo de giro: 35.4 | Longitud máxima de giro: 43.3/55/82 | Husillo agujero pasante: 5.15 | Chuck: 15
Santiago, México
KLR 400
Características: KLR 400 | Diámetro máximo de giro: 26.8 | Longitud máxima de giro: 43.3/55/82 | Husillo agujero pasante: 5.15 | Chuck: 15
Santiago, México
KLR 300
Características: KLR 300 | Diámetro máximo de giro: 19.7 | Longitud máxima de giro: 27.6/47.2 | Husillo agujero pasante: 3.88 | Chuck: 10
Santiago, México
KLS 1860V
Characteristics: KLS 1860V | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.5″ | Width of the bed: 13″ | Distance between points: 60″ | Cross travel: 11″ | Auxiliary...
Santiago, México
MD 70
Characteristics: MD 70 | Height of centers: 35″ | I turn over the bench: 70″ | Turning on the cross slide: 53″ | Width of the bed: 52″ | Distance between points: 120″ - 480″ | Spindle edge diameter: Ø 9″ (Opt. Ø ...
Santiago, México