Nuevo Pillar Drills

Taladro de banco de 22" de giro

Número de modelo: 10063

Taladradora de columna de banco de 14"

Número de modelo: 10061

Taladro de mesa oscilante de 17"

Número de modelo: 10062

PM2820EVS Drill Press

Taladro de columna de pie de velocidad variable de 15" | PM2815FS

Cabezal oscilante de 14" modelo de perforadora de banco

Número de modelo: 10060

Taladro de columna PM2800B

15" Sierra variable de velocidad Taladradora de banco PM2815BT

Linmac DP-915AH

• Fabricante: Linmac

Linmac RF-40S2F

• Fabricante: Linmac
• Diámetro de perforación: 40 millimeter

Capacidad de perforación: Ø 40 mm (1-1/2”) | Accionamiento del motor: 1hp 230 V, 3 fases | Velocidad (estándar): 55 – 1260 rpm, 6 velocidades (motor de 1 velocidad) | Cono del husillo: MT3 | Golpe: 107 mm | Profu...

Linmac DP-925GAD

• Fabricante: Linmac

Rango alto de velocidad de la cabeza de husillo: 245 - 2000 RPM

TPR 2000H

Characteristics: TPR 2000H | Maximum drilling diameter: 2.75″ Castings 2.55″ Steel | Distance between column and spindle shaft: Maximum 78.7″. Minimum 19.3″ | Distance between spindle end and chuck base worktable...

TPR C2500

Characteristics: TPR C2500 | Maximum drilling diameter: 3.94″ Castings 3.15″ Steel | Distance between column and spindle shaft: Maximum 98.4″. Minimum 19.68″. | Distance between spindle end and chuck base worktab...

TPR 920A

Characteristics: TPR 920A | Maximum drilling diameter: 1.97″ Castings 1.25″ Steel | Distance between column and spindle shaft: Maximum 37.4″. Minimum 8.7″ | Distance between spindle end and chuck base worktable: ...

TPR 1230H

Characteristics: TPR 1230H | Maximum drilling diameter: 2.16″ Castings 1.65″ Steel | Distance between column and spindle shaft: Maximum 46″ Minimum 13.4″ | Distance between spindle end and chuck base worktable: M...