Nuevo en Hebei, China

Underground Scaler, HT65

Dimensions (transportation): 6250×1600×2015mm | Wheel base: 2056mm | Min. ground clearance: ≥290mm | Frame swing angle: ±8° | Max. steering angle: ±35° | Weight: 6800kg | Travel speed: 0-7km/h | Roof (lifting hei...

Underground Scaler, HT60

Dimensions (transportation): 7450×1650×2300mm | Wheel base: 2375mm | Min. ground clearance: ≥290mm | Frame swing angle: ±7° | Max. steering angle: ±35° | Weight: 11000kg | Travel speed: 0-18km/h | Roof (lifting h...

Hydraulic Bolting Jumbo, HT92-D

Working coverage: 2400×2400mm-3500×3500mm | Length: 9000mm | Width: 1500mm | Height (roof retracted): 1800mm | Height (roof extended): 2500mm | Min. turning radius: Inside 3100mm Outside 5000mm | Gradeability: 14...

Hydraulic Bolting Jumbo, HT91-S

Working coverage: 6000×7000mm | Dimensions (transportation): 10800×1980×2500mm | Dimensions (working): 11600×2670×3300mm | Ground clearance: 325mm | Min. turning radius: Inside 3300mm Outside 7000mm | Gradeabilit...

Hydraulic Drilling Jumbo, HT72

Drilling coverage: 4000×4000mm-6100×6100mm | Dimensions: 8700×1750×2140(2850)mm | Ground clearance: 320mm | Min. turning radius: Inside 3400mm Outside 5500mm | Gradeability: 14° | Weight: 650kg | Total length: 30...

Hydraulic Drifter, RC3000

Drilling diameter: 89 - 127 mm | Impact power: 33 kW | Impact frequence: 30 - 40 Hz | Flow rate: 170 L/min | Operating pressure: 120 - 200 bar | Shank type: T51, ST58, ST68（Male Shank） | Weight: 490 kg | Length (...

Hydraulic Drifter, RC2200

Drilling diameter: 43 - 76 mm | Impact power: 21 kW | Impact frequence: 55 Hz | Flow rate: 120 L/min | Operating pressure: 120 - 200 bar | Shank type: T38, T45（Male Shank） | Weight: 225 kg | Length (without shank...

Hydraulic Drifter, RC1200/RC1200A

Hydraulic Drifter, RC600

Drilling diameter: 28 – 45 mm | Impact power: 6.5 kW | Impact frequency: 85 Hz | Flow rate: 60 L/min | Operating pressure: 120 - 180 bar | Weight: 76 kg | Length (without shank): 495 mm | Width: 266 mm | Height (...

Shaft Drilling Jumbo, Hydraulic Shaft Jumbo, GYSJZ

Shaft Drilling Jumbo, Hydraulic Shaft Jumbo, YSJZ

Shaft Drilling Jumbo, Pneumatic Shaft Jumbo, SJZ

Coal Mine Repair Machine with Hydraulic Breaker, WPZ-37/600

Installed power: 37 kW | Rated pressure: 21.5 MPa | Max. flow: 60 L/min | Max. temperature rise: 50℃ | Max. oil temperature: 75℃ | Drive mode: Integrated with hydraulic motor and reducer | Travel: Crawler | Groun...

Underground Scaler, XMPYT56.5/32

Overall dimensions (l×w×h): 7354×1650×2329 mm | Retractable length (boom): 7674 mm | Max. scaling height: 7500 mm | Hydraulic hammer swing angle: 180° (up/down), 180° (left/right) |...

Down-The-Hole (DTH) Drilling Rig, KQTG-150

Overall dimensions (lxwxh): 4300x1940x2450 mm | Weight: 6000 kg | Applicable tunnel height: 2.8-4.5 m | Total power: 32 kW | Hole depth: 0-100 m | Hole diameter: ⌀ 80-254 mm | Working pressure: 0.8-2.1 MPa | Rota...