Usado Laminadores

ASMetal Roughing mill

• Fabricante: ASMetal

ASMetal Rolling Mill Housing

• Fabricante: ASMetal

ASMetal Roll Chock

• Fabricante: ASMetal

ASMetal Bearing Chock

• Fabricante: ASMetal

Brand New Wrought Iron Machinery - 5 in One

• Fabricante: Attar Steel

C Chanel Machine

• Fabricante: Attar Steel

Peso: 20 toneladas

Flat steel rolling leveling cross cutting unit

• Fabricante: SHANDONG ZHONGJI LUYUAN MACHINERY CO.,LTD

A. applicable materials: hot and cold coiled plate. | B. material quality: domestic authentic steel or international standard steel | D. material thickness: 2-6mm | E. material width: 20-80mm (Max) | G. steel coi...

Cnc cold rolling production line

Lycc300: 6-14 | Goods: The picture | The whole production line is mainly composed of: pay-off stand, rust-reducing machine, main rolling mill, side-speed machine, heat treatment equipment, cutting machine, wire t...

Roof Tile Machine

Material thickness: 0.12-0.5mm | With yield strength: 235-345-550Mpa Yield Strength | Roller material: 45# steel | Hardness: Heat treatment to HRC58-62 degrees | Roller station: 22steps to form | Shaft diameter: ...

Metal Plate Rolling Machine

Asymmetrical Electric Rolling Machine

• Fabricante: MYT(Shanghai) Machinery Equipment Co.,Ltd

W11g-1.2×1530: 1.2 | W11g-1.5×1300: 1.5 | W11g-2×1000: 2 | W11-1.2×1530: 1.2 | W11-1.5×1300: 1.5

Round Duct Grooving Machine

• Fabricante: MYT(Shanghai) Machinery Equipment Co.,Ltd

L-15: 1.2 | L-10: 1.0

W12-10× 1000 línea de producción específica de cilindros de gas GLP de cuatro rodillos Máquina de rodamiento

• Fabricante: Linan Xinran Solar Equipment

After-sales service: 3years | Específico: W12-10×1000 | Grosor máximo de la bobina: T10*W1000*φ400 (σs≤245MPa) | Maximum pre-bending plate thickness: T8*1000*φ400 (σs≤245MPa) | Maximum roll width: 1000 | Longitud...

Máquina de rodillos con alta eficiencia de la línea de producción de cilindros

• Fabricante: Linan Xinran Solar Equipment

After-sales service: 3years | Específico: W12-10×1000 | Grosor máximo de la bobina: T10*W1000*φ400 (σs≤245MPa) | Maximum pre-bending plate thickness: T8*1000*φ400 (σs≤245MPa) | Maximum roll width: 1000 | Longitud...

1450mm Partial 8 hi Cold rolling mill

Calidad del material: acero inoxidable serie 400 | Propiedades mecánicas: σs≤400 N/mm2 | Espesor: 0.3-1.0mm | Anchura: 900-1300mm | Diámetro de laminación (interior/exterior): Φ600/(Φ2000)mm | El peso máximo de l...