Building Filters
UF Membrane (NM-UF-2860)
- Fabricante: Hinada Water Treatment Tech
Pre - filtration: 50-150 um | Max turbidity of inlet water: ≤15 NTU | Filtration: Cross-flow filtration or dead end filtration | Max inlet water pressure: 0.45 MPa | Max pressure difference of transmembrane: 0.2 ...
Chenzhou, China
Household Water UF Filter
Pore size: ＜0.1 um | Max turbidity of inlet water: ≤100 NTU | Filtration: Cross-flow filtration filtration | Inlet water pressure: 0.1—0.2 MPa | Filtration method: Outside-in | Design flux: 60—100L/H | Dia i/o: 0...
Chenzhou, China
Ultrafiltration Membrane (NM-UF-250 )
Pre – filtration: 50-150 um | Max turbidity of inlet water: ≤50 NTU | Filtration: Cross-flow filtration or dead-end filtration | Max inlet water pressure: 0.40 MPa | Max pressure difference of transmembrane: 0.25...
Chenzhou, China
Electrophoresis Painting UF Membrane
- Fabricante: Hinada Water Treatment Tech
Diameter of hollow fibers: 0.3/0.4mm | Filtration method: Outside-in | Effective membrane area: 12m² | Design flow rate: 60—160L/m².H | Potting material: Epoxy resine | Housing material: U-PVC | Pore size: 0.01 u...
Chenzhou, China
EDI Module (Electrodeionization System)
- Fabricante: EDI
Raw water: Output of RO System, the Conductivity ≤ 10 μ/ cm | Ph value: 6.5—7.5 | Temperature: 5℃–38℃ | Working pressure: 0.15—0.4MPa | Hardness: ≤1ppm(Take CaCO3 as sample test) | Organic matter: TOC ＜0.5ppm,it’...
Chenzhou, China
Seawater Desalination RO Membrane
Active membrane area: 400ft2 (37.2m²) | Permeate flow: 9000 gpd(34m3/d) | Rejection rate: 99.8% | Salt rejection: 99.4%–99.8% | Configuration: Low Fouling Spiral Wound | Membrane polymer: PA (polyamide) Thin Film...
Chenzhou, China
Chenzhou, China
RO Membrane 8040 ULP-4040
Permeate flow: 11000 gpd(40m3/d) | Salt rejection: 99.4%--99.7% | Configuration: Low Fouling Spiral Wound | Membrane polymer: PA (polyamide) Thin Film Composite | Membrane active area: 400 ft2 (39.7 square meter)...
Chenzhou, China
Tandem Drum Roller
- Fabricante: SANY GROUP
Fuerza centrífuga: 46/28 - 169/119 kN | Potencia nominal: 28.1 - 119 kW | Peso operativo: 3000 - 14000 kg
Changsha, China
Double Wheel Trench Cutter
- Fabricante: SANY GROUP
Potencia del motor: 570.5 kW/rpm | Espesor de ranurado: 800 - 1800 mm | Profundidad máxima de ranurado: 120 m
Changsha, China