Building Filters
NON-CONTACT CAN SENSOR SP7001, SP7002
Detection method: Capacitive-coupled signal detection No bare-wire connections | Detectable cables: AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in) | Number of channels: 1 CH (S...
Nagano, Japón
LEAK CURRENT HiTESTER ST5540
Measurement methods: Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground....
Nagano, Japón
AC/DC CURRENT SENSOR CT7636
Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 10 kHz (-3dB) (When used in combination with C...
Nagano, Japón
CLAMP ON SENSOR 9272-05
Rated current: 20 A AC, or 200 A AC (selectable) | Max. allowable input: 50 A rms (at 20 A range), 300 A rms (at 200 A range) | Frequency characteristics: 1 Hz (±2 % rdg. ±0.1 % f.s.) to 100 kHz (±30 % rdg. ±0.1 ...
Nagano, Japón
AC FLEXIBLE CURRENT SENSOR CT9667
Rated input current: 5000 A AC/ 500 A AC | Max. allowable input: 10000 A continuous (45 to 66 Hz, requires derating at frequency) | Bandwidth: 10 Hz to 20 kHz (±3dB) | Amplitude and phase accuracy: ±2 % rdg. ±0.3...
Nagano, Japón
CLAMP ON SENSOR 9695-02
Rated measurement current: 50 A AC | Max. measurement current: Continuous 60 A (45 to 66 Hz) | Output rate: 10 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±2° (4...
Nagano, Japón
CLAMP ON SENSOR 9661
Rated measurement current: 500 A AC | Max. measurement current: Continuous 550 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3% rdg. ±0.01% f.s. | Phase accuracy: ±0.5° (45 Hz...
Nagano, Japón
AC/DC CURRENT SENSOR CT6863-05
Rated current: 200 A AC/DC | Max. allowable input: 400 A rms (requires derating) | Frequency characteristics: Amplitude: DC to 500 kHz Phase: DC to 300 kHz | Amplitude and phase accuracy: DC ±0.05 % rdg. ±0.01 % ...
Nagano, Japón
WAVE PROCESSOR 9335
Supported units: Model MR6000, MR6000-01 Model MR8880-20 Model 8861-50/8860-50 (Not compatible with dual time-axis data, compatible only to MEM, REC, and REC & MEM data recorded using single-axis sampling only) M...
Nagano, Japón
DATA ANALYSIS SOFTWARE UA1801
License contents: License key (USB) only *Note: Please purchase computer, display and other hardware separately and download the installer and documentation from Hioki’s website. | Supported test equipment: FA181...
Nagano, Japón
FIT-LINE INSPECTION DATA CREATION SYSTEM UA1780
Included: Installation CD, license key (USB), instruction manual (× 1 each) *Caution: Computer, monitor, and other hardware not included. | Gerber data input functions: Loading of Gerber files (RS-274X, RS-274D),...
Nagano, Japón
AC/DC AUTO-ZERO CURRENT SENSOR CT7731
Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...
Nagano, Japón
CLAMP ON LEAK SENSOR 9657-10
Rated primary current: AC 10 A (for leak current measurement, 50/60 Hz) | Max. allowable input (45-66 hz): Max. 30 A of continuous input | Rated output current: AC 100 mV/A | Amplitude accuracy (45-66 hz): ±1.0...
Nagano, Japón
CLAMP ON SENSOR 9694
Rated measurement current: 5 A AC | Max. measurement current: Continuous 50 A (45 to 66 Hz) | Output rate: 10 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. | Phase accuracy: ±2° (45 Hz t...
Nagano, Japón
AC/DC CURRENT SENSOR CT6862-05
Rated current: 50 A AC/DC | Max. allowable input: Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less | Frequency bandwidth: Amplitude: DC to 10 MHz Phase: DC to ...
Nagano, Japón