Hikoki SDS Max 1100W 2 Mode Rotary Hammer Drill DH40MC
- Fabricante: Hikoki
Broca de capacidad: 40mm (1-9/16") | broca central: 105mm (4-1/8") | Potencia de entrada: 1,100W | Vástago de la broca: SDS Max | Velocidad sin carga: 620/Min. | Ritmo de impacto en carga plena: 2.800/Min. | Lon...
$524 USDYatala, Australia
URYU AIR DRILL
- Fabricante: Uryu
Panton Hill, Australia
ARCHDALE 8515
- Fabricante: Archdale
Panton Hill, Australia
ACE MAGNETIC DRILL LOW PROFILE NITTO
- Fabricante: Nitto
Weight: 9.5 KG | No load speed: 950 MIN-1 | Voltage: 220 V | Ac hole diameter: 11.5 TO 35 MM | Frequency: 50HZ | Rated power consumption: 800 W | Magnet power consumption: 35 W | Plate thickness: 6 TO 50 MM | Mag...
$1,639 USDRockhampton, Australia
MAGNETIC DRILL 12-32MM COOLANT NITTO
- Fabricante: Nitto
Weight: 16 KG | Power source (single phase): 220~240V AC 50-60HZ | Rated power consumption: 950W | Rated current: 4.3A | No load speed: 530RPM | Magnetic power consumption: 70W | Magnetic holding power: 900KG/F |...
$1,409 USDRockhampton, Australia
MAGNETIC DRILL BASE 42MM WITH COOLANT
Weight: 12.5KG | Cap( depth ): 52MM CAP ( DIAMETER ):40MM | Capacity ( twist drill ): 16MM | Motor power: 1020 WATT | Input power: 1100 WATT | Speed: 440RPM | Magnetic dead lift: 9,900NM ON 25MM STEEL PLATE | Hei...
$1,311 USDRockhampton, Australia
Thermal Friction Drill, 4000rpm
- Fabricante: Eximus
Mansfield, Australia
Tullamarine, Australia
Tullamarine, Australia
Tullamarine, Australia
Tullamarine, Australia
Tullamarine, Australia
Sídney, Australia- Sídney, Australia
Consejo: Ingrese un fabricante, modelo o palabra clave