Usado Torno en Shanghai, China

GAP-BED ENGINE LATHES

View: 20 | Specifications: UNIT | Capacity: Max. swing dover bed | Max. swing dia.in gap: mm | Max. swing overslides: mm | Max. workpiece length: mm | Spindle: Spindle bore diameter | Type of spindle nose: no | S...

Engine Lathe

View: 19 | Swing over bed: mm | Swing over cross slide: mm | Distance between centers: mm | Swing in gap: mm | Width of gap: mm | Width of bed: mm | Spindle bore: mm | Spindle speed: rpm | Max torque spindle main...

Engine Lathe

View: 84 | Max. swing over bed: mm | Distance between centers: mm | Max. turning diameter: mm | Max swing over cross slide: mm | Main spindle bore: mm | Bar capacity: mm | Main spindle speed: r/min | Max. cutting...

Engine Lathe

• Taladro del eje: 52 millimeter

View: 87 | Swing over bed: Φ360mm | Swing over cross slide: Φ224mm | Swing in gap: 502mm | Height of center: 180mm | Distance between centers: 1000mm | Width of bed: 187mm | Total travel of cross slide: 170mm | T...

Engine Lathe

View: 50 | Capacity: Max.swing over bed | Max.swing over cross slide: 325mm | Max.swing over gap: 630mm | Effective length of gap: 260mm | Center distance: 1000\1500\2000\3000mm | Bed width: 330mm | Headstock: Sp...

Light Engine Lathe

View: 47 | Swing over bed: mm | Swing over carriage: mm | Swing over gap: mm | Width of bed-way: mm | Distance between centers: mm | Spindle bore: mm | Range of speed: rpm | Longitudinal feeds: mm/r | Cross feeds...

Engine Lathe

View: 87 | Swing over bed: mm | Swing over carriage: mm | Swing over gap: mm | Width of bed-way: mm | Distance between centers: mm | Spindle diameter: mm | Range of speed: rpm | High step 85-1500: High step 85-15...

Engine Lathe

View: 11 | Capacities: Max.swing over bed | Max.swing over cross side: Φ420mm | Max.swing in gap: Φ870(34″) | Center distance: 1000mm(40″) 1500mm(600″) 2000mm(80″) 3000mm(118″) | Effective length of gap: 230mm(9″...

Engine Lathe

• Taladro del eje: 75 millimeter

View: 67 | Max. swing over bed: 500mm | Max. swing over carriage: 300mm | Max. length of workpiece: 2000mm | Width of bed: 400mm | Section of turning tool: 25X25mm | Spindle: Spindle speeds | Hole though spindle:...