Usado electro design en Japón

HORIBA Advanced Techno Co., Ltd. Finesse Solutions, LLC HE-960CW

• Fabricante: Horiba

Product name: Industrial 2-channel conductivity meter | Measurement method: Electrode type (2-electrode method) | Sensor input: 2 channels (for concurrent measurement with sensors isolated each other) | Cell cons...

HORIBA STEC, Co., Ltd. D700uF

• Fabricante: Horiba

HORIBA STEC, Co., Ltd. D700T

• Fabricante: Horiba

This product is available in the following countries and territories: China Germany Ireland Israel Italy Japan Korea (South) Malaysia Singapore Taiwan United Kingdom United States

CLAMP ON POWER LOGGER PW3365

• Fabricante: HIOKI E.E

Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 c...

SHORT-OPEN TESTER FA1221

• Fabricante: HIOKI E.E

Number of test points: 128 pins (during 4-terminal measurement, up to 32 sets) | Number of test steps: Round-robin short/open : 128 pins Component data : Max. 10000 steps Charge data : 40 sets Pin contact data : ...

IN-CIRCUIT TESTER FA1220-02

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

RESISTANCE HiTESTER RM3543

Measurement method: Four-terminal, constant-current DC | Resistance range: 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 7 steps | Display: Monochrome graphic LC...

ANALOG MΩ HiTESTER IR4018

• Fabricante: HIOKI E.E

Rated output voltage: 1000 V DC | Effective maximum indicated value: 2000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 2 M to 1000 MΩ | Lower limit resistance: 1 MΩ (measurement resistance v...

ANALOG MΩ HiTESTER IR4017

• Fabricante: HIOKI E.E

Rated output voltage: 500 V DC | Effective maximum indicated value: 1000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 1 M to 500 MΩ | Lower limit resistance: 0.5 MΩ (measurement resistance v...

VOLTAGE DETECTOR 3481

• Fabricante: HIOKI E.E

Measurement function: Voltage detection | Operating voltage range: 40 V to 600 V AC (When brought into contact with a 2 mm^2 insulated cable equivalent to 600 V polyvinyl chloride insulated wire) Maximum sensitiv...

CLAMP ON POWER LOGGER PW3360

• Fabricante: HIOKI E.E

Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 c...

INSULATION TESTER IR4053

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Measuring range/ accuracy: 0.200 to 500 MΩ / ±4% rdg. 501 to 2000 MΩ / ±8% rdg. | Other measuring range / accuracy: 0 to 0.199 MΩ / ±2%...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

ELECTRODE FOR SURFACE RESISTANCE SME-8302

Dimensions: φ 40 mm (1.57 in) × 115 mm (4.53 in) | Lead length: 1 m (3.28 ft) | An electrode distance: 4 mm (0.16 in)

SURFACE/VOLUME RESISTANCE MEASUREMENT ELECTRODE SM9001

Dimensions: φ 100 mm (3.94 in) × 223 mm (8.78 in) | Mass: 2.5 kg (88.2 oz) | Cable length: 1 m (3.28 ft) | Included accessories: Instruction manual ×1, Counter-electrode with integrated stand ×1, Protective stand...