Usado Tornos Cnc en Nuevo León, México

CSM 1440 CNC

Characteristics: CSM 1440 CNC | I turn over the bench: 14��� | Turning on the cross slide: 8-5/8��� | Distance between points: 40��� | Width of the bed: 8.1��� | Spindle nose: Camlock D1-4 (Opt. ASA A1-4) | Hole ...

CRL 1640 CNC

Characteristics: CRL 1640 CNC | I turn over the bench: 16��� | Turning on the cross slide: 9.05��� | Distance between points: 35��� | Width of the bed: 10.23��� | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17��� | Turning on the cross slide: 10-7/8��� | Distance between points: 37��� | Width of the bed: 12��� | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole thro...

CHL 21 SERIES

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7��� | Turning on the cross slide: 11.8��� | Distance between points: 40��� / 60��� / 80��� / 120��� | Width of the bed: 13.58��� | Spindle nose: ASA A2-...

CSC 18 SERIES

KLS 1840N

KLR 600

Características: KLR 600 | Diámetro máximo de giro: 35.4 | Longitud máxima de giro: 43.3/55/82 | Husillo agujero pasante: 5.15 | Chuck: 15

KLR 400

Características: KLR 400 | Diámetro máximo de giro: 26.8 | Longitud máxima de giro: 43.3/55/82 | Husillo agujero pasante: 5.15 | Chuck: 15

KVT 55E

Características: KVT 55E | Diámetro máximo de giro: 21.6 | Longitud máxima de giro: 19.7 | Diámetro máximo de vuelco: 29.5 | Nariz del husillo: A2-11

KVR 320X202

KLM 200SM

Características: KLM 200SM | husillo secundario: SI | Diámetro máximo de giro: 11.3 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secund...

KLM 300SM

Características: KLM 300SM | husillo secundario: SI | Diámetro máximo de giro: 16.5 | Longitud máxima de giro: 24 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secundar...

KLR 200

Characteristics: KLR 200 | Maximum turning diameter: 13.8 | Maximum turning length: 22.4/39.4 | Spindle through hole: 2.44 | Chuck: 8.26

HL 44

Characteristics: HL 44 | I turn over the bench: 44��� | Turning on the cross slide: 17.3��� | I turn over the neckline: 61��� | Width of the bed: 24��� | Distance between points: 120��� (Opt 80��� / 160��� / 200�...