Usado loading

Ercolina TB60-TC

• Fabricante: Ercolina
• Modelo: TB60

Tube: (Min.) ¼″ (Max.) 2½″ | Pipe: (Max.) 2″ Sch. 40 | Centerline radius: (Min.) 2 x Ø (Max.) 15″ | Degree of bend: 0-210° | Bending speed: Variable | Voltage: 120V 1ph | Length, width, height: 27″ x 15″ x 36″

150 manual pipe fitting installation machine

Diámetro exterior de la manguera de goma: 70~200mm | Carrera de carga del tubo: 360mm | Carrera de sujeción: 180mm | Presión nominal: 8MPa | Suministro de energía: 380V/50Hz | Potencia: 4kw | Fuerza de carga del ...

Auto Rebar Bending System(KBS-25-5 KBS-25-5A)

Supply table: 0.75kw X 1 (KBS-25-5A) 1.5kw X 1 | Compressor: 3.75kw X 1 | Electric: 220V/380V 3Phase | Bending capacity: D10~D25 | Bending angle: 15˚~ 180˚ | Working speed: 5sec/180˚ 6.3rpm | Supply table speed: ...

Auto Rebar Bending System(KBS-16-5)

Supple table: 0.75kw x 1 | Compressor: 2.25kw ×1 | Electric: 220V / 380V 3Phase | Bending capacity: D10~D16 | Bending angle: 15˚~ 180˚ | Working speed: 4sec/180˚ 9.5rpm | Supply table speed: 7.2m/min | Loading ca...

Auto Rebar Bending System(KBS-32-2DS)

Supply table: 1.5kw X 1 | Head transfer: 0.75kw X 2 | Compressor: 2.25kw X 1 | Electric: 380V 3Phase | Bending capacity: D10 ~ D32 | Bending angle: 15˚~ 180˚ | Working speed: 2.8sec/180˚ 10.8rpm | Supply table sp...

ERCOLINA GB130 Mandrel benders

• Fabricante: Ercolina

Módulo de flexión: 70 cm³ | Diámetro externo mínimo: 10 mm | Diámetro exterior máximo: 142 mm | Radio de doblez máximo (clr): 450 mm | Radio de doblez mínimo (clr): 40 mm | Ángulo máximo de doblado: 195° | Potenc...

Banding - System BA 100

Semi Automatic Carton Box Strapping Machine For PP Strap Banding Machine KZB-II

Voltage (v/hz): AC 220/50 110/60 | Power (w): 320 | Max. strapping size (l×h) (mm): Not stipulated | Strapping speed (sec/cycle): 2.5 | Strapping force (v/hz) (n): 10-450 (Adjustable) | Height of table (mm): 500 ...

Semi Automatic Wire Seal Inserting Crimping Machine| SR-WS01

Parámetro: Especificación | Función: sellado automático de alambre, terminal. corte automático de alambre, pelado, inserción de sellado automático y crimpado del terminal | Capacidad: 1200-1500PCS/H | cable apli...

Aircraft areo flat wire hairpin forming shape the generator conductor wire forming bending machine WIND-AWF

6. bastidor de soldadura, pulverización en superficie, color: gris. rectificado de placa de Taiwán, 金 plating.

Sheet bending machine with a rotating flexible beam IV2145, 4 mm by 3200 mm

• Fabricante: Nelidovsky plant of hydraulic presses NZGP

Чпу: No | Weight: 6380 kg | Length: 3790 мм | Width: 2400 mm | Height: 2420 mm | Type of machine: Sheet scissors | Producing country: USSR | Type of equipment: The machine is bending

I2222B, IB2222 - Three-roll sheet-rolling machine

• Fabricante: Slavgorod KPO plant

Чпу: No | Weight: 7500 kg | Producing country: USSR

3-roll sheet-fed machine WMW GOTHA UBBD 20х2800

• Fabricante: WMW

Чпу: No | Producing country: USSR