Usado programmer en okushitani

METMAC Spiral Tube Former

• Fabricante: Guangzhou Metmac

Diámetro de trabajo: 80-1600 mm | Acero galvanizado: 0,4-1,3 mm | Acero inoxidable: 0,4-0,8 milímetros | Aluminio: 0,4-1,3 mm | 0,4-1,0 mm: 137 mm | 1,1-1,3 mm: 140 mm | Velocidad de producción: 60 m/min | Potenc...

METMAC Spiral Tube Forming Machine

• Fabricante: METMAC

Diámetro de trabajo: 80-2500 mm | Acero galvanizado: 0,4-2,0 mm | Acero inoxidable: 0.4-1.2 mm | Aluminio: 0,4-2,0 mm | 0,4-1,0 mm: 137 mm | 1,1-1,3 mm: 140 mm | 1,4-2,0 mm: 150 mm | Velocidad de producción: 60 m...

2T Auto Feed Loose Wire Pin Terminal Crimping Machine

Nombre de la marca: Sinrad | Número de modelo: SR-CM116 | Dimensión(l*w*h): 86*45*136cm | Modo de funcionamiento: Semiautomático | Función: alimentación automática de terminales de alfiler y crimpado | Alimentaci...

Purlin Roll Forming Machine - Automatic - CZ300 - 3 punching stations

Dimensions (d x r x c): 14600 mm x 1700 mm x 1600 mm | Productivity / rolling speed (m / p): 18 m / p ÷ 20 m / p (Or faster depending on request) | Chassis: I # 396 | Machine wall (mm): 43 mm | Cutting board: Hig...

Five wires single end crimping machine

5.servo: MITSUBISHI

Automatic Left And Right

Capacidad de flexión (mm): OD 19.05 | Radio máximo de curvatura(mm): R80 | Eje: 3

HBM-40

Bending machine - With adjustment - 6.1M - H612

Dimensions (d x r x c): 6.1 x 1.1 x 2.3 m | Weight / kg): 3500 (kg) | Seismic thickness (mm): ≤ 0.8 (Applicable to corrugated iron with tensile strength 40 Kg/mm2 - normal steel) 0.7 (Applicable to 430 stainless ...

Bending machine - With adjustment - 6.1M - H613

Dimensions (d x r x c): 6.1 x 1.3 x 2.4 m | Weight / kg): ~ 4800 (kg) | Seismic thickness (mm): ≤  1.2 mm (Applicable to corrugated iron with tensile strength 40 Kg/mm² - normal corrugated iron) | Stainless steel...

Bending machine - With adjustment - 6.1M - H623

Dimensions (d x r x c): 6.1 x 1.15 x 2.1 m | Weight / kg): ~ 2500 (kg) | Seismic thickness (mm): ≤  0.6 mm (Applicable to corrugated iron with tensile strength ≤ 50 Kg/mm² - normal steel) | Stainless steel thickn...

Deck Floor Roll Forming Machine | Floor Filling Machine - H76

Dimensions (d x r x c): 18,700 mm x 1,800 mm x 1,500 mm | Weight / kg): 26.000 Kg | Productivity / speed (m / p): 12 15 (Or faster on request) | Number of shaft pairs: 28 Pairs | Roller diameter (mm): 100 | Geare...

Purlin Roll Forming Machine - Z300 - 1 Punching Station | 2 punching stations | 3 punching stations

Z (min) (mm): 100 mm x 40 mm x 50 mm | Z (max) (mm): 300 mm x 82 mm x 88 mm | Dimensions (d x r x c): 10 300 mm x 1400 mm x 1500 mm | Productivity / rolling speed (m / p): 18 m/p ÷ 20 m/p | Roller diameter (mm): ...

Purlin Roll Forming Machine - C300 - 1 Punching Station | 2 punching stations | 3 punching stations

Size (dxrxc): 8500 mm x 1400 mm x 1500 mm | Productivity/rolling speed (m/min): 18 22 m/p | Roller diameter (mm): 70 | Mass (kg): 8.000 | Electric power (kw / hp): 15 / 20 | Pair of forming rollers: 16 pairs | Sh...

KANG INDUSTRIAL WC67Y-30/1300A, Vertical Press Brake, NC Type Bending Machine with E21 System, 415V Power

• Fabricante: Kaka

Presión normal: 300 KN | Longitud máxima de trabajo: 1300 mm | Distancia entre montantes: 940 mm | Altura abierta: 320 mm | Profundidad de garganta: 190 mm | Golpe: 100 mm | Altura de la mesa: 900 mm | Motor prin...

Single-stage roll forming machine - Wave circle

Dimensions (d x r x c): 10500 mm x 1700 mm x 1400 mm The length of the machine can be changed from ± (0.4 m ÷ 1.6 m) according to the waveform (Number of shaft pairs increases or decreases) | Weight / kg): 8000 K...