Usado Pillar Drills en Nuevo León, México

TLR-124 TALADRO RADIAL 13" COLUMNA X 60" BANDERA MARCA CARLTON

• Fabricante: Carlton

TLR-119 TALADRO RADIAL, 10" COLUMNA X 38" BANDERA MARCA DONAU

• Fabricante: Luigi Bandera

TLC-130 MESA DE TRABAJO CON 2 CABEZALES TALADRO DE COLUMNA MARCA LELAND GIFFORD

• Fabricante: Leland Gifford

TLC-119 TALADRO DE COLUMNA DE BANCO MANUAL 5/8" MARCA SATURNO

TLC-088 TALADRO DE COLUMNA DE BANCO MANUAL 3/4" MARCA MARINARO

TLC-141 TALADRO DE COLUMNA DE BANCO MANUAL, CONO MT2 , CAPACIDAD 5/8", DELTA

• Fabricante: Delta

TLR-122 TALADRO RADIAL 9" COLUMNA X 44" BANDERA MARCA RICHMOND

• Fabricante: Luigi Bandera

TLR-034 TALADRO RADIAL, 6" COLUMNA X 38" BANDERA MARCA JOHANSON

• Fabricante: Luigi Bandera

TLC-125 TALADRO DE COLUMNA MANUAL MARCA BUFFALO

• Fabricante: Buffalo

TLC-143 TALADRO DE COLUMNA MANUAL MODELO 12000, CONO MT3, MARCA ELLIS

• Fabricante: Ellis

TLC-144 TALADRO DE COLUMNA MANUAL, CONO MT2, MESA 12" X 17", MARCA DELTA

• Fabricante: Delta

TPR C2500

Characteristics: TPR C2500 | Maximum drilling diameter: 3.94″ Castings 3.15″ Steel | Distance between column and spindle shaft: Maximum 98.4″. Minimum 19.68″. | Distance between spindle end and chuck base worktab...

TPR 920A

Characteristics: TPR 920A | Maximum drilling diameter: 1.97″ Castings 1.25″ Steel | Distance between column and spindle shaft: Maximum 37.4″. Minimum 8.7″ | Distance between spindle end and chuck base worktable: ...

TPR 1230H

Characteristics: TPR 1230H | Maximum drilling diameter: 2.16″ Castings 1.65″ Steel | Distance between column and spindle shaft: Maximum 46″ Minimum 13.4″ | Distance between spindle end and chuck base worktable: M...

TPR 1600H

Characteristics: TPR 1600H | Maximum drilling diameter: 2.75″ Castings 2.55″ Steel | Distance between column and spindle shaft: Maximum 63″ Minimum 13.7″ | Distance between spindle end and chuck base worktable: M...