Usado working width

2017 Chevalier FSG-618M, 2017, ROLLER BEARING TABLE,

• Fabricante: Chevalier
• Modelo: FSG-618M

Working surface to spindle center: 18" | Cross handwheel per rev.: 0.100" | Downfeed handwheel graduations: 0.0001" | Vertical handwheel per rev.: 0.050" | Https: // /XbsgcTpJGDs?si=LHO5gTMwA7ozkyfE

BAILEIGH PR-514

• Fabricante: Baileigh
• Modelo: PR-514

BURR KING M85

• Fabricante: Burr King

BURR KING M25

• Fabricante: Burr King

BURR KING M45

• Fabricante: Burr King

MIWE 2014 CO1408 ELECTRIC CONDO TRIPLE DECK OVEN Fully Refurbished

• Fabricante: Miwe

Power type: Electric

Manitowoc Nugget Style 1000 Pound Ice Maker x 2 with Remote Refrigeration x 2 and 1600 pound Follett Bin

• Fabricante: Manitowoc

2004 Fadal VMC 4020HT

• Fabricante: Fadal
• Modelo: VMC-4020HT
• Cono del eje: CAT 40

Table working surface: 20" X 48" | Floor to table surface: 32" | T-slots (# x width x span): 5 X .709" X 3.75" | Maximum weight on table: 3,641 LBS. | Table travel, x-axis (longitudinal): 40" | Table travel, y-ax...

BURR KING M15

• Fabricante: Burr King
• Modelo: M15

Sharp SH-1224-2A

• Fabricante: Sharp

220v: 5.4KVA/25 AMPS | 440v: 5.4KVA/12.5 AMPS

Bluebird H424 17.5 in. Lawn Aerator

• Fabricante: Blue Bird

1993 Harig 612, 1993, CABLE DRIVE, 2X DRO, WALKER PMC

• Fabricante: Harig
• Modelo: Super 612

Ancho y largo ground: 6" X 12" | Recorrido longitudinal: 12-3/4" | Recorrido de cruce: 6-3/4" | Altura de trabajo vertical bajo la rueda de 7": 12" | Diámetro máximo de la muela: 8" | Grad. manivela elevadora: 0....

1978 Harig SUPER 618, 1978, WALKER CERAMX PMC,

• Fabricante: Harig
• Modelo: Super 618

Ancho y largo en bruto: 6" x 18" | Altura de trabajo vertical bajo la rueda de 7": 11- 3/4" | Recorrido longitudinal de la mesa: 20" | Cross travel: 6- 3/4" | Muela de afilar: 7" × 1/2" × 1-1/4" | Diámetro máximo...

2017 Yasda Model YMC430 Micro Center 5 Axis 16.5" x 11.8" x 9.8" High Speed Machining Center ()

Country: United States | X-axis travel: 16.5"/420mm | Y-axis travel: 11.8"/300mm | Z-axis travel: 9.8"/250mm | Table to spindle nose distance: 5.9" - 15.7" / 150mm - 400mm | Spindle taper hole: HSK-E32 | Spindle ...