Usado variable speed en straße-von-dover

2015 Link-Belt Excavators (LBX) 350 X4
- Fabricante: Link-Belt
- Modelo: 350 X4
- Caballos de potencia (CV): 268 horsepower
- Horas: 8,500 hour
Hours: 8,500 | Weight: 82,400 lbs. (37,400 kg) | Fuel tank capacity: 153 gal. (580 l) | Hydraulic tank capacity: 46 gal. (175 l) | Engine type: Tier 4 turbocharged with electronic control | Engine make: Isuzu | E...
$66,000 USD
Corpus Christi, Texas
2025 Hewescraft 190 Sea Runner Hardtop
- Fabricante: Hewescraft
Loa (length): 19 ft 6 in | Beam (width): 8 ft | Propulsion type: Powered | Engine: Honda 150 VTEC | Propulsion: Single Outboard | Fuel type: Gas
Ripon, California
MOLDURADORA 6 CABEZALES
Chihuahua, México
SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP
Chihuahua, México
2026 Brinkley Z AIR 315
- Fabricante: Brinkley
Interior color: COASTAL CAROLINA
Siracusa, Nueva York
MOLDURADORA 5 CABEZALES
Chihuahua, México
KTM 5VKF-E MILL POWER G2 (2 axles / 3 axles)
Characteristics: KTM 5VKF-E MILL POWER G2 (2 axles / 3 axles) | Size of the table: 12″ x 50″ | Longitudinal displacement (x-axis): 30 ″ | Transverse displacement (y-axis): 17″ | Vertical displacement (z-axis): 17...
Santiago, México
2014 Link-Belt Excavators (LBX) 350 X3
- Fabricante: Link-Belt
- Modelo: 350 X3
- Caballos de potencia (CV): 268 horsepower
- Horas: 6,700 hour
Hours: 6,700 | Weight: 80,028 lbs. (36,300 kg) | Fuel tank capacity: 153.2 gal. (580 l) | Hydraulic tank capacity: 46.2 gal. (175 l) | Engine type: Tier 4A turbocharged with electronic control | Engine make: Isuz...
$60,000 USD
Corpus Christi, Texas
2023 BOMAG BW100ADM-5
- Fabricante: Bomag
- Modelo: BW100 ADM
- Caballos de potencia (CV): 20 horsepower
- Horas: 13 hour
Hours: 13 | Fuel capacity: 7.9 gal | Water capacity: 26.4 gal | Operating weight: 3,748 lb | Number of drums: 2 | Drum width: 39.4 in | Drum diameter: 22.8 in | Vibratory drum: Yes | Water system: Yes | Centrifug...
$38,900 USD
Pittsburgh, Pensilvania
Vendedor de confianza
2016 Lissmac SBM-XS-300 G1E1
- Fabricante: Lissmac
- Modelo: SBM-XS 300
Working hours machine: 5320 h | Max. working width: 300 mm | Workable material thickness: 1-15 mm | Tensión: 400V / 50 Hz | Total power: 13,5 A | Total current consumption: 7,5 c. V. | Insulation class: IP42 | In...
Gammertingen, Alemania
KTM 4VKF-E MILL POWER G2 (2 axles / 3 axles)
Characteristics: KTM 4VKF-E MILL POWER G2 (2 axles / 3 axles) | Size of the table: 12″ x 50″ | Longitudinal displacement (x-axis): 30 ″ | Transverse displacement (y-axis): 17″ | Vertical displacement (z-axis): 17...
Santiago, México
RL-HG 540
Vista, California
APS-104
Label length: 0.5 – 11 | Label height: 0.5 – 6 | Electrical: 110 VAC, 60Hz, Single Phase(220 VAC option available) | Height: 60 | Length: 68 | Width: 40 | Weight: ~425 lbs. (192.7 kg) | Speed: Up to 150 CPM
Vista, California
APS 108
Electrical requirements: 110 VAC, 10AMPS (220 VAC Optional) | Label length: 0.5u0094 – 22u0094 (1.25 cm – 55 cm)** | Label height: 0.75u0094 – 7.75u0094 (2 cm – 19.5 cm) | Labeling direction: Left side off – Outs...
Vista, California
LIJADORA DE TAMBOR
Maximum width (in): 25 | Maximum thickness (in): 6 | Minimum thickness (in): 1/32 | Drum: 5 x 25 extruded aluminum | Drum speed: 1740 RPM | Drive motor (tefc): 3 HP | Power requirements: 220 V, 1 Ph
Chihuahua, México