Usado variable speed en shintomaruten

CASETA PINTURA CONTINUA PARA MOLDURAS

TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURAS

CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - ITALIANO

Bottom head: 4 knives

LIJADORA DE MOLDURAS

REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12” - REGRESADORA

Length: 84" | Width: 84" | Height: 48" | Feed belt height: 34" | Board width: up to 12" | Board thickness: 1/4" - 6" | Board length: Unlimited

2015 Link-Belt Excavators (LBX) 250 X4

• Fabricante: Link-Belt
• Modelo: 250 X4
• Caballos de potencia (CV): 177 horsepower
• Horas: 1,500 hour

Hours: 6,500 | Weight: 56,900 lbs. (25,800 kg) | Fuel tank capacity: 108 gal. (410 l) | Hydraulic tank capacity: 39 gal. (147 l) | Engine type: Tier 4 turbocharged with electronic control | Engine make: Isuzu | E...

2025 Hewescraft 190 Sea Runner Hardtop

• Fabricante: Hewescraft

Loa (length): 19 ft 6 in | Beam (width): 8 ft | Propulsion type: Powered | Engine: Honda 150 VTEC | Propulsion: Single Outboard | Fuel type: Gas

2024 Hewescraft 190 Sea Runner

• Fabricante: Hewescraft

Loa (length): 19 ft 6 in | Beam (width): 8 ft 6 in | Propulsion type: Powered | Engine: Honda 150 hp VTEC | Propulsion: Single Outboard | Fuel type: Gas

KTM 3VKF MILL POWER G2 (2-axle / 3-axle)

Characteristics: KTM 3VKF MILL POWER G2 (2-axle / 3-axle) | Size of the table: 10″ x 50″ (10″ x 54″ optional). | Longitudinal displacement (x-axis): 32″ | Transverse displacement (y-axis): 14 " | Vertical displac...

MOLDURADORA 5 CABEZALES

2014 Link-Belt Excavators (LBX) 250 X3

• Fabricante: Link-Belt
• Modelo: 250 X3
• Caballos de potencia (CV): 177 horsepower
• Horas: 3,000 hour

Hours: 6,500 | Weight: 55,336 lbs. (25,100 kg) | Fuel tank capacity: 108.3 gal. (410 l) | Hydraulic tank capacity: 38.8 gal. (147 l) | Engine type: Tier 4A turbocharged with electronic control | Engine make: Isuz...

MOLDURADORA 6 CABEZALES

SIERRA CINTA - CON ALIMENTADOR - VOLANTES 54” - 100 HP

2015 Link-Belt Excavators (LBX) 350 X4

• Fabricante: Link-Belt
• Modelo: 350 X4
• Caballos de potencia (CV): 268 horsepower
• Horas: 2,500 hour

Hours: 8,500 | Weight: 82,400 lbs. (37,400 kg) | Fuel tank capacity: 153 gal. (580 l) | Hydraulic tank capacity: 46 gal. (175 l) | Engine type: Tier 4 turbocharged with electronic control | Engine make: Isuzu | E...

KTM 5VKF-E MILL POWER G2 (2 axles / 3 axles)

Characteristics: KTM 5VKF-E MILL POWER G2 (2 axles / 3 axles) | Size of the table: 12″ x 50″ | Longitudinal displacement (x-axis): 30 ″ | Transverse displacement (y-axis): 17″ | Vertical displacement (z-axis): 17...