Usado variable speed en maruta

Johnson Controls VSC32024NBA20C VSC Series III Variable Speed Micro Drive, IP20 [Nuevo]

• Fabricante: Johnson

Johnson Controls VS015410A-L0000 VSD Variable Speed Open Drive, 15 HP, 480 VAC [Refurbished]

• Fabricante: Johnson

Johnson Controls VFD68CHH-2C Variable Frequency Drive Fan Speed Control, 3 HP [New]

• Fabricante: Johnson

Johnson Controls VS005410A-L0000 VSD Series Variable Speed Open Drive, 5HP 480V [Refurbished]

• Fabricante: Johnson

Johnson Controls VS9D6204B-M0000 VSM Series 2 Variable Speed Drive, 3HP 2.2kW [New]

• Fabricante: Johnson

2025 Marvel/Amada VT4555 (Mark II) Manual Vertical tilt frame bandsaw, 1" Blade, 45 degree angle left or right

• Fabricante: Amada
• Modelo: VT4555

Country: United States | Speed range: 50 – 450 fpm (15 – 137 m/min) infinitely variable speed drive system. | Front-mounted speed control: Allows blade speed to be adjusted from operator’s control station. | Feed...

IDM RAPTOR SERIES 23 COMPLETE SHREDDING/RECYLCLING LINE. #0895624

Primary shredder model: PS-200-56-23-HD (2007 Unit) Rebuilt before Seller Purchased | – base model: IDM Raptor Series Model 25 | – cutters: 2-1/2” thick 3-hook blades on a single stack, 4140 alloy heat treated | ...

Larick 700 Series Feed‑Through Profile/Brush Sander

Top heads: 2, 3, 4 | Side heads: 0, 2 | Motors: 1 HP / 6-Pole / Three-Phase | Voltage: 208-240v / Single-Phase (Split-Phase) / 50-60hz | Variable speed: AC Inverter 150-600 rpm | Arbor: 1.25″ Dia. by 11″ Long | V...

Evans Midwest PR 257/258 Pinch Roller

• Fabricante: Evans

Options no selection: PR 257 W/Spacers, PR 258 W/Handwheel, PR 258 W/Handwheel/Variable Speed | Electrical: 110V Single Phase | Motor: ½ HP | Required amps: 8 | Maximum width: 62” (*64” Option Available) | Maximu...