Usado variable speed en flandre

2025 Marvel/Amada VT4555 (Mark II) Manual Vertical tilt frame bandsaw, 1" Blade, 45 degree angle left or right

• Fabricante: Amada
• Modelo: VT4555

Country: United States | Speed range: 50 – 450 fpm (15 – 137 m/min) infinitely variable speed drive system. | Front-mounted speed control: Allows blade speed to be adjusted from operator’s control station. | Feed...

Larick 700 Series Feed‑Through Profile/Brush Sander

Top heads: 2, 3, 4 | Side heads: 0, 2 | Motors: 1 HP / 6-Pole / Three-Phase | Voltage: 208-240v / Single-Phase (Split-Phase) / 50-60hz | Variable speed: AC Inverter 150-600 rpm | Arbor: 1.25″ Dia. by 11″ Long | V...

IDM RAPTOR SERIES 23 COMPLETE SHREDDING/RECYLCLING LINE. #0895624

Primary shredder model: PS-200-56-23-HD (2007 Unit) Rebuilt before Seller Purchased | – base model: IDM Raptor Series Model 25 | – cutters: 2-1/2” thick 3-hook blades on a single stack, 4140 alloy heat treated | ...

2010 Ingersoll Rand IRN5OH-CC 575 Volt 50 HP Variable Speed Oil Flooded Screw Compressor.

• Fabricante: Ingersoll Rand
• Modelo: IRN5

BRIDGEPORT 1.5 HP Variable Speed Mill

• Fabricante: Bridgeport
• Modelo: 15 HP VARIABLE SPEED

Superficie de trabajo de la mesa: 9" x 42" | Recorrido eje x: 36" | Recorrido del eje y: 14" | Recorrido del eje z: 5" | Recorrido de la rodilla: 16" | Capacidad de collarín: R8 | Velocidad del cabezal: 500-4200 ...

MEECO No 6 TWO ROLL BAR & TUBE STRAIGHTENER (13145)

• Fabricante: Meeco

Max diameter: 7.5" | # rolls: 2 | Power: 275 hp | Dimensions: 18.5' L X 12' W X 7' H | Weight: 85,500 | Application: SOLID BAR OR TUBE | Maximum diameter: 7.5" (190mm) | Type rolls: CONCAVE, CONVEX | No. of roll...

Speed-D-Burr MMSM

• Fabricante: Speed-D-Burr

Tamaño del barril: 20" x 20" | Velocidades: Variable | Motor principal: 1 HP, 110V