Usado variable speed drives en lower-silesian-porando

LIJADORA DE TAMBOR

Maximum width (in): 25 | Maximum thickness (in): 6 | Minimum thickness (in): 1/32 | Drum: 5 x 25 extruded aluminum | Drum speed: 1740 RPM | Drive motor (tefc): 3 HP | Power requirements: 220 V, 1 Ph

LAMINADORA 62" RODILLOS SEGMENTADOS

Feed rate: 50 FPM | Maximum width: 62” | Maximum thickness: 2” | Work height: 30-1/2” | Drive motor: ½ HP | Electrical: 120 V, 1 PH, 60 Hz | Air requirement: 100 PSI

REASERRADORA HORIZONTAL - 1 BANDA – 11-3/4” ANCHO X 10” ALTO

Feed speed: 4-27m/min (13-90FPM) | Max. cutting height: 250mm (10”) | Max. workpiece length: 580mm | Saw wheel diameter: 711.5mm (28”) | Saw wheel width: 22.7mm (1”) | Blade speed: 2816m/min (9240FPM) | Saw motor...

EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100

• Fabricante: Evans

Feed motor: 1/2 HP, DC | Electrical: 220 VAC 3 Phase 60 HZ | Power consumption: 13 - 17 KW | 90o laminate: 3/4HP per Station | Material length: Min. 48” | Material width: Max. 48.5” | Without saw: Min. 8” | With ...

CEPILLO 1 CARA - 26 PULGADAS

Part number: 2CK-CM626 | 30 x 12 x 1.5mm (qty: 100)

2018 ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A

• Fabricante: Biesse
• Modelo: Akron

Minimum width of the part: 85mm | Minimum piece length: 140mm

LAMINADORA 62" RODILLOS PLANOS

Feed rate: 50’ FPM | Maximum width: 62” | Maximum thickness: 2” | Work height: 30-1/2” | Drive motor: ½ HP | Air requirement: 100 PSI

LIJADORA DE MOLDURAS

SIERRA RADIAL AUTOMATICA

Variable speed: 0-50 FPM | Max cut stroke: 50” | Work surface: 60” X 96” | Drive motor: 3 HP | Electrical: 230 V, 3 PH, 60 Hz | Air requirement: 80 PSI

REASERRADORA HORIZONTAL - 1 BANDA – 12” ANCHO X 12” ALTO

Main drive motor: 30 HP TEFC | Length: 84 in | Width: 93 in | Height: 68 in | Weight: 2,000 lbs

LIJADORA DE BASTONES - 2 LIJAS

Sanding belt drive motor: 5HP | Dust sution motor: 1/2HP | Sanding belt size: 5" X 73” | Applicable rod diameter: Ø5-Ø80mm | Feed speed (variable): 1-20m/mm | Net weight: 450kgs | Gross weight: 530kgs

Power Dog 209 Commercial Tiller

Rectificadoras sin centros ESTARTA 301 #4342

• Fabricante: Estarta
• Modelo: 301

Apertura entre muelas: 1,5 / 50 mm | Max.anchura de muela en rectificado a plongée: 125 mm | Dimensiones muela rectificadora (od x id x ancho): 325 x 175 x 125 mm | Øext.min. muela de trabajo: 220mm | Profundidad...